Article

Development stages of the geodetic network in Tashkent city

Azizjon RuzievDepartment of Geodesy and Geoinformatics, National University of Uzbekistan, 4 University str., 100174 Tashkent, UzbekistanOtabek YusupjonovDepartment of Geodesy and Geoinformatics, National University of Uzbekistan, 4 University str., 100174 Tashkent, UzbekistanLóránt FöldváryDepartment of Geodesy and Surveying, Budapest University of Technology and Economics, Műegyetem rkp. 3, 1111, Budapest, HungaryZiyo OkhunovDepartment of Geodesy and Geoinformatics, National University of Uzbekistan, 4 University str., 100174 Tashkent, UzbekistanSherzod RakhimovDepartment of Engineering and Technology of Geological Exploration Works, University of Geological Sciences, 64, Olimlar str., 100041 Tashkent, UzbekistanSherzod RakhmonovTashkent Institute of Irrigation and Agricultural Mechanization Engineers" National Research University, 39 Str.K.Niyazov, 100000 Tashkent, UzbekistanGayrat YakubovDepartment of Space Data Acquisition and Processing, Center for Space Monitoring and Geoinformation Technologies, 4 Muminova str., 100164 Tashkent, Uzbekistan

E3S Web of Conferencesjournal2024en

ABI

Abstract

The purpose of this study is to analyze the stage of development of the geodetic network in Tashkent city, conduct satellite observations, and preprocess measurements to establish a urban frame network. The stages of development of the geodetic network in Tashkent were analyzed and evaluated. A preliminary reconnaissance was conducted at the work site to verify the suitability of selected points for satellite observations. Suitable days for field measurements were scheduled using software. Observations were carried out at 9 points of the designed frame network using 6 Chcnav i90 GNSS receivers in 2 sessions employing the Static method. The sessions were linked by 3 points, and each session lasted four hours. Measurement data from the Chcnav i90 GNSS receivers were obtained in ‘RINEX’ format for processing. Joint measurements from the two sessions were processed using Trimble Business Center software version 5.52. Initial adjustments were made to the measurements of the lengths between points, and their accuracy was verified. The maximum root mean square error of side measurements was found to be less than the specified value for the frame network. A figure closure program was utilized to accurately determine baseline length errors.

Topics

Engineering and Agricultural Innovations Economic and Industrial Development

Identifiers

DOI: 10.1051/e3sconf/202459003006

Citations and references

Cited by 2 1 references

Metrics — AkademScholar · Coming soon