Skip to main content
Article

Flexible mica films coated by magnetron sputtered insulating layers for high‐temperature capacitive energy storage

Chao YinKey Laboratory of Engineering Dielectrics and its Application, Ministry of Education Harbin University of Science and Technology Harbin ChinaTiandong ZhangKey Laboratory of Engineering Dielectrics and its Application, Ministry of Education Harbin University of Science and Technology Harbin ChinaChanghai ZhangKey Laboratory of Engineering Dielectrics and its Application, Ministry of Education Harbin University of Science and Technology Harbin ChinaYue ZhangKey Laboratory of Engineering Dielectrics and its Application, Ministry of Education Harbin University of Science and Technology Harbin ChinaChang Kyu JeongDivision of Advanced Materials Engineering Jeonbuk National University Jeonju South KoreaGeon‐Tae HwangDepartment of Materials Science and Engineering Pukyong National University Busan South KoreaQingguo ChiKey Laboratory of Engineering Dielectrics and its Application, Ministry of Education Harbin University of Science and Technology Harbin China
2024en
ABI

Abstract

Abstract High‐temperature energy storage performance of dielectric capacitors is crucial for the next generation of power electronic devices. However, conduction losses rise sharply at elevated temperature, limiting the application of energy storage capacitors. Here, the mica films magnetron sputtered by different insulating layers are specifically investigated, which exhibit the excellent high‐temperature energy storage performance. The experimental results revealed that the PbZrO 3 /Al 2 O 3 /PbZrO 3 (PZO/AO/PZO) interface insulating layers can effectively reduce the high‐temperature leakage current and conduction loss of the composite films. Consequently, the ultrahigh energy storage density ( W rec ) and charge‒discharge efficiency ( η ) can be achieved simultaneously in the flexible mica‐based composite films. Especially, PZO/AO/PZO/mica/PZO/AO/PZO (PAPMPAP) films possess excellent W rec of 27.5 J/cm 3 and η of 87.8% at 200°C, which are significantly better than currently reported high‐temperature capacitive energy storage dielectric materials. Together with outstanding power density and electrical cycling stability, the flexible films in this work have great application potential in high‐temperature energy storage capacitors. Moreover, the magnetron sputtering technology can deposit large‐area nanoscale insulating layers on the surface of capacitor films, which can provide technical support for the industrial production of capacitors.

Identifiers

Citations and references

Cited by 30 references