Evaluation and comparison of zinc oxide and zinc sulphide nanoparticles derived from Sol-Gel method for supercapacitance performance
Abstract
Zinc oxide and zinc sulphide nanoparticles were produced using the sol-gel method. We employed nanoparticle identification methods for the examination of several factors. The precursor solutions are converted into an intermediate state that mimics gel during the sol-gel process, and then solidified. This technique provides fine control over the size, shape, and crystallinity of the resultant ZnO nanoparticles , hence modifying their electrochemical behaviour in the context of supercapacitor applications. An X-ray diffraction (XRD) examination revealed that the synthesized ZnO nanoparticles had a hexagonal character, while the ZnS nanoparticles had a cubic nature with diameters of around 22 nm and 36 nm, respectively. A transmission electron microscope (TEM) and a scanning electron microscope (SEM) are used to study the morphology and structural analysis. A particle size, surface area, production methods and testing settings are only a few of the variables that affect certain capacitances. In general, ZnO is recognized for displaying a certain capacitance that is frequently cited as being higher than ZnS. At a scan rate of 5 mV, the specific capacity of ZnO nanoparticles was found to be 33.2 F/g, whereas that of ZnS nanoparticles was found to be 6.5 F/g at a scan rate of 10 mV. One way to monitor pseudo capacitive behavior is by cyclic voltammetry .