Статья

Cladding of stainless steel on carbon steel

С. Х. СулеймановMaterials Science Institute, Uzbek Academy of Sciences, G. Mavlyanov Str. 2-b, 700084 Tashkent, UzbekistanB. B. BaizakovMaterials Science Institute, Uzbek Academy of Sciences, G. Mavlyanov Str. 2-b, 700084 Tashkent, UzbekistanA. G. BugakovMaterials Science Institute, Uzbek Academy of Sciences, G. Mavlyanov Str. 2-b, 700084 Tashkent, UzbekistanM. del C. AlonsoI. Garcı́aA.J. Vázquez

Journal de Physique IV (Proceedings)journal1999fr

ABI

Аннотация

The possibility of producing anticorrosion and wear resistant cladding from stainless steel onto tool and carbon steels by means of melting in high energy density light flux is demonstrated. Experiments are conducted in an installation with two arc xenon lamps of 10 kW power of each. Metallographic investigation of the interface shows the existence of high quality metallic bond between the clad and base material. The dilution of Ni and Cr is shown to depend on the melting time. A strong correlation between microstructure of produced cladding and treatment parameters - flux density and exposure time - is revealed.

Перевод пока недоступен

Темы

Welding Techniques and Residual Stresses Hydrogen embrittlement and corrosion behaviors in metals Additive Manufacturing Materials and Processes

Идентификаторы

DOI: 10.1051/jp4:1999370

Цитирования и источники

Цитирований: 0Использованных источников: 0

Показатели — AkademScholar · Скоро