Статья

3D printed microfluidic devices for cell culture

Marta CantaDepartment of Applied Science and Technology, Polytechnic University of Turin, Turin; PolitoBIOMed Lab, Polytechnic University of Turin, TurinDésirée BaruffaldiDepartment of Applied Science and Technology, Polytechnic University of Turin, Turin; PolitoBIOMed Lab, Polytechnic University of Turin, TurinIgnazio RoppoloDepartment of Applied Science and Technology, Polytechnic University of Turin, Turin; PolitoBIOMed Lab, Polytechnic University of Turin, TurinAnnalisa ChiapponeDepartment of Applied Science and Technology, Polytechnic University of Turin, Turin; PolitoBIOMed Lab, Polytechnic University of Turin, TurinCandido Fabrizio Pirri1epartment of Applied Science and Technology, Polytechnic University of Turin, Turin; PolitoBIOMed Lab, Polytechnic University of Turin, Turin; Center Advanced Materials for Sustainable Future Technologies, Italian Institute of Technology, TurinFrancesca FrascellaDepartment of Applied Science and Technology, Polytechnic University of Turin, Turin; PolitoBIOMed Lab, Polytechnic University of Turin, Turin

Biomedical Science and Engineeringjournal2021en

ABI

Аннотация

A successful application of the 3D printed materials in the biomedical field requires extensive studies to ensure their biocompatibility at every step of the process. Here, different components suitable for cell applications, including a microfluidic device, were 3D printed using common resins and a deep analysis of their biocompatibility and post printed protocols was conducted.

Темы

3D Printing in Biomedical Research Additive Manufacturing and 3D Printing Technologies Innovative Microfluidic and Catalytic Techniques Innovation

Идентификаторы

DOI: 10.4081/bse.2021.161

Цитирования и источники

Цитирований: 0Использованных источников: 4

Показатели — AkademScholar · Скоро