Работы, цитирующие эту работу

Работ: 6

Работа: Machine-building anti-corrosion composite polymeric materials and coatings based on local raw materials and production waste

1. Research of internal stresses of polymer and paint coatings by console and force methods formed by amine and isocyanate hardeners

   Soyibjon Negmatov, Begijon Тojiboyev, Nodira Аbed +4

   СтатьяMaterial Properties and ApplicationsAIP conference proceedings2025Цитирований: 0

   ABIABI:AkademIndex/openalex/2025.article.006216

2. Development of technology for the production of hot-rolled heat-strengthened metal composite fittings of class A500C based on local and secondary raw materials

   J. S. Fayzullaev, S. S. Negmatov, R. H. Pirmatov +3

   СтатьяMaterial Properties and ApplicationsAIP conference proceedings2025Цитирований: 0

   ABIABI:AkademIndex/openalex/2025.article.006234

3. Determination of optimum geometrical parameters of the working bodies of cotton processing machines and mechanisms

   Soyibjon Negmatov, Nodira Аbed, Оlim Eshkobilov +1

   СтатьяTextile materials and evaluationsAIP conference proceedings2025Цитирований: 0

   ABIABI:AkademIndex/openalex/2025.article.006255

4. On the mechanism of physical and chemical interactions of components of composite polymer materials filled with inorganic and organic ingredients

   Nodira Аbed, Soyibjon Negmatov, Komila Negmatova +5

   СтатьяNatural Fiber Reinforced CompositesAIP conference proceedings2025Цитирований: 0

   ABIABI:AkademIndex/openalex/2025.article.006266

5. Relaxation maximum interpenetrating polymer systems (IPS) based on epoxy and polyurethane polymers

   Soyibjon Negmatov, Nodira Аbed, Komila Negmatova +3

   СтатьяEpoxy Resin Curing ProcessesAIP conference proceedings2025Цитирований: 0

   ABIABI:AkademIndex/openalex/2025.article.007186

6. Dependence of physical and mechanical properties on various technological parameters of injection molding in formation of composite polymer materials

   Nodira Аbed, Soyibjon Negmatov, Оlim Eshkobilov +2

   СтатьяInjection Molding Process and PropertiesAIP conference proceedings2025Цитирований: 0

   ABIABI:AkademIndex/openalex/2025.article.007216