Influence of a flat disc on the rectilinear stable motion of the unit of tillage machines
Ulugbek KuzievInstitute of Irrigation and Agricultural Mechanization Engineers (National research university), Kari Niyazov str. 39, Tashkent, 100000, UzbekistanBerdirasul KhudayarovInstitute of Irrigation and Agricultural Mechanization Engineers (National research university), Kari Niyazov str. 39, Tashkent, 100000, UzbekistanAqeel Hasan RizviThe Center for International Forestry Research and World Agroforestry (CIFOR-ICRAF), Asia Continental Program, New Delhi, IndiaYunus RakhimovInstitute of Irrigation and Agricultural Mechanization Engineers (National research university), Kari Niyazov str. 39, Tashkent, 100000, UzbekistanGuzal EshchanovaInstitute of Irrigation and Agricultural Mechanization Engineers (National research university), Kari Niyazov str. 39, Tashkent, 100000, UzbekistanMukaddas JoraevaInstitute of Irrigation and Agricultural Mechanization Engineers (National research university), Kari Niyazov str. 39, Tashkent, 100000, UzbekistanDilbar UsmonovaInstitute of Irrigation and Agricultural Mechanization Engineers (National research university), Kari Niyazov str. 39, Tashkent, 100000, Uzbekistan
ABI
Аннотация
The article discusses the design and operation of a combined unit’s flat disk, which is installed within the unit. The study focuses on the torques caused by forces acting on the unit’s working parts and the conditions for their balancing. The depth at which the flat disk enters the soil and the required diameter to meet this requirement are also presented. The article includes the results of theoretical and experimental studies to determine the shape and area of the disk segment, where the disk’s diameter must be at least 45 cm and the depth of its penetration into the soil is within 14-15 cm.
Перевод пока недоступен
Темы
Идентификаторы
Цитирования и источники
Цитирований: 0Использованных источников: 9