Cleaning OF Irrigation Systems From Muddy Sediments by Hydromechanization Method
A. (Aziz) HaydarovTashkent Institute of Irrigation and Agricultural Mechanization Engineers " National Research University Aybek Arifjanov DcS , prof. , "Tashkent Institute of Irrigation and Agricultural Mechanization Engineers " National Research University Sarvarbek Melikuziev PhD student , "Tashkent Institute of Irrigation and Agricultural Mechanization Engineers " National Research University Husrav Kabutov Glacier Studies Center of the Academy of Sciences of the RepublicA. (Aybek) ArifjanovS. (Sarvarbek) MelikuzievH. (Husrav) Kabutov
ABI
Аннотация
The article mentions the use of a new technology for cleaning irrigation systems from muddy sediments. This technology was modeled and tested using Ansys Mechanical Finite Element Analysis (FEA) Software for Structural Engineering. Analytical analyzes were carried out to maintain the design parameters of irrigation system coatings. As a result of the analysis, a deformable tooth device using a wedge with a thickness k (N/m) is applied to the coating with an impact force F (N) ???? =10 0 -30 0 It is determined that it is affected under the corners, so that it is compressed in the range of =5-15 (mm) and does not damage the coating of the irrigation system.
Перевод пока недоступен
Цитирования и источники
Цитирований: 0Использованных источников: 0