Статья

Converting Residual Alkali into Sodium Compensation Additive for High-Energy Na-Ion Batteries

Tao ZhangState Key Laboratory of Solidification Processing, Center for Nano Energy Materials, School of Materials Science and Engineering, Northwestern Polytechnical University and Shaanxi Joint Laboratory of Graphene (NPU), Xi’an 710072, ChinaJi KongState Key Laboratory of Solidification Processing, Center for Nano Energy Materials, School of Materials Science and Engineering, Northwestern Polytechnical University and Shaanxi Joint Laboratory of Graphene (NPU), Xi’an 710072, ChinaChao ShenState Key Laboratory of Solidification Processing, Center for Nano Energy Materials, School of Materials Science and Engineering, Northwestern Polytechnical University and Shaanxi Joint Laboratory of Graphene (NPU), Xi’an 710072, ChinaShengjie CuiState Key Laboratory of Solidification Processing, Center for Nano Energy Materials, School of Materials Science and Engineering, Northwestern Polytechnical University and Shaanxi Joint Laboratory of Graphene (NPU), Xi’an 710072, ChinaZezhou LinDepartment of Applied Physics, The Hong Kong Polytechnic University, Hong Kong 999077, ChinaYuyu DengState Key Laboratory of Solidification Processing, Center for Nano Energy Materials, School of Materials Science and Engineering, Northwestern Polytechnical University and Shaanxi Joint Laboratory of Graphene (NPU), Xi’an 710072, ChinaMinghao SongState Key Laboratory of Solidification Processing, Center for Nano Energy Materials, School of Materials Science and Engineering, Northwestern Polytechnical University and Shaanxi Joint Laboratory of Graphene (NPU), Xi’an 710072, ChinaLifang JiaoKey Laboratory of Advanced Energy Materials Chemistry (Ministry of Education), Renewable Energy Conversion and Storage Center (ReCast), College of Chemistry, Nankai University, Tianjin 300071, ChinaHaitao HuangDepartment of Applied Physics, The Hong Kong Polytechnic University, Hong Kong 999077, ChinaTing JinDepartment of Applied Physics, The Hong Kong Polytechnic University, Hong Kong 999077, ChinaKeyu XieState Key Laboratory of Solidification Processing, Center for Nano Energy Materials, School of Materials Science and Engineering, Northwestern Polytechnical University and Shaanxi Joint Laboratory of Graphene (NPU), Xi’an 710072, China

2023en

ABI

Аннотация

Sodium-ion batteries (SIBs) have attracted widespread attention in large-scale electrical energy storage. However, the dissolution of the solid–electrolyte interphase (SEI) and the abundant defect sites in hard carbon (HC) lead to serious Na+ loss in sodium-ion full cells, limiting the energy density and cycle life of SIBs. Here, we introduce acetic acid (AC) in layered cathode materials to neutralize the residual alkali species and form sodium acetate (AC-Na). AC-Na possesses a high specific capacity of ∼300 mAh g–1 and serves as the Na compensation additive with ∼92% capacity utilization and an appropriate oxidation potential (∼4.1 V). On the basis of sodium compensation, the 2.0 Ah P2-Na0.85Li0.12Ni0.22Mn0.66O2@AC||HC pouch cell affords a capacity retention of 95.1% over 120 cycles, with the energy density improved from 112 to 130 Wh kg–1 (based on the mass of the cell core). The high-efficiency sodium compensation strategy opens up a new route to enable high-energy SIBs for practical application.

Перевод пока недоступен

Идентификаторы

DOI: 10.1021/acsenergylett.3c02075

Цитирования и источники

Цитирований: 3Использованных источников: 0

Показатели — AkademScholar