Overall efficiency increment in a pin-fin microchannel heat sink using response surface methodology and Pareto optimization

In modern technology, anticipating the optimal thermal performance in microchannel heat sinks (MCHSs) is a vital response to overheating challenges in high-performance electronic devices. The Response Surface Methodology (RSM) application presents an innovative way of modeling such equipment's behavior. In the current study, an MCHS with pin fins was chosen to examine the Nusselt number (Nu) and pressure drop (ΔP). Using two RSM models and multi-objective optimization, the study tried to discern the optimal values of the responses in the MCHS. The RSM models examined three key parameters: length, installation angle, and the spacing between pin fins. The interactive impacts of independent parameters and their consequent effect on the responses were also explored. The RSM models attained exceptional predictive accuracy, with the determination coefficient values of 0.9946 and 0.9986 for Nu and ΔP, respectively. The working fluid applied in the present work was water with an inlet temperature of 288 K and a Reynolds number of 300. Besides, the constant heat flux of 100 W/cm2 was exposed to the bottom wall of the MCHS. In pursuit of an optimal MCHS design that maximizes Nu while minimizing ΔP, the study employed the relative efficiency index (η) parameter. Considering heat transfer and ΔP in the pin-fin MCHS, the optimal design showed an impressive improvement of about 64.5 % compared to the fin-free heat sink. Moreover, the study provided Pareto optimal points for Nu, ΔP, and η, adding depth to understanding the complex trade-offs within the investigated MCHS.

Перевод пока недоступен