Development Of Deformations In The Reinforcement Of Beams With Composite Reinforcement
Akramov Xusnitdin AkhrarovichDoctor Of Science, Professor, Department Of Civil Engineering, Tashkent Institute Of Architecture And Civil Engineering, Tashkent, UzbekistanMakhkamov Yuldashali MamajonovichAssociate Professor, Candidate Of Technical Sciences, Department Of Civil Engineering, Ferghana Polytechnic Institute, Ferghana, UzbekistanUmarov Shodiljon Abdug'ofurovichDoctoral Student, Department Of Civil Engineering, Tashkent Institute Of Architecture And Civil Engineering, Tashkent, Uzbekistan
ABI
Аннотация
This article describes the results of experimental research equipped with bottleflastic composite fittings in this article and the installation of special devices in the stretching and compressive zones of the sample gaps Musasura through the mass deformations and processed. It contains cases of deformation in the length of composite combination in the bowls under the influence of cargo forms. There is information on the development of voltage and deformations generated in composite fittings. In the article, 3 seaters, with the form of sample bowls in 3 series, provide an experiments conducted on sample culving experiments with the differences in the turn of the transverse steps and placement of cargo.
Перевод пока недоступен