Kinematic analysis of a planetary mixer mechanism
V. S. BogdanovBelgorod State Technological University named after V G Shukhov, 46, Kostyukova street, Belgorod, 308014, RussiaG. ChemerichkoBelgorod State Technological University named after V G Shukhov, 46, Kostyukova street, Belgorod, 308014, RussiaS. AnciferovBelgorod State Technological University named after V G Shukhov, 46, Kostyukova street, Belgorod, 308014, RussiaD. V. BogdanovBelgorod State Technological University named after V G Shukhov, 46, Kostyukova street, Belgorod, 308014, RussiaL S KulakovBelgorod State Technological University named after V G Shukhov, 46, Kostyukova street, Belgorod, 308014, RussiaA V PopovichBelgorod State Technological University named after V G Shukhov, 46, Kostyukova street, Belgorod, 308014, RussiaA. KarachevcevaBelgorod State Technological University named after V G Shukhov, 46, Kostyukova street, Belgorod, 308014, Russia
2019en
ABI
Аннотация
Abstract The production of dry building mixtures is currently one of the most promising areas of the building materials industry due to the widespread use of its products. The mixers with a planetary movement of working bodies are best suited among the wide variety of designs of mixers for the production of these products. One of the drawbacks of planetary mixers is the contamination of the planetary gear and the ingress of lubricants into finished products. To eliminate this disadvantage, a protective diaphragm was installed to separate the tank and the drive part. The motion simulation of the rotator was created using the CAD / CAM / CAE system NX.
Перевод пока недоступен
Идентификаторы
Цитирования и источники
Цитирований: 5Использованных источников: 0