Improving the Wear Resistance of Gear Teeth by Cyclic Quenching with Inductive Heating
D. M. BerdievKarimov Tashkent State Technical University, 100097, Tashkent, UzbekistanA.A. YusupovKarimov Tashkent State Technical University, 100097, Tashkent, Uzbekistan
ABI
Аннотация
Cyclic heat treatment of steel samples is considered as a means of increasing their abrasive wear resistance. Cyclic heating of 65Г steel parts to 450°С increases their wear resistance by 40% in comparison with traditional inductive quenching.
Перевод пока недоступен