Статья

Chemical Vapor Deposition of Aluminum Nanowires on Metal Substrates for Electrical Energy Storage Applications

James BensonSchool of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332, United StatesSofiane BoukhalfaSchool of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332, United StatesAlexandre MagasinskiSchool of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332, United StatesAlexander KvitMaterials Science Center & Materials Science Department, University of Wisconsin, Madison, Wisconsin 53706, United StatesGleb YushinSchool of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332, United States

2011en

ABI

Аннотация

Metal nanowires show promise in a broad range of applications, but many synthesis techniques require complex methodologies. We have developed a method for depositing patterned aluminum nanowires (Al NWs) onto Cu, Ni, and stainless steel substrates using low-pressure decomposition of trimethylamine alane complex. The NWs exhibited an average diameter in the range from 45 to 85 nm, were crystalline, and did not contain a detectable amount of carbon impurities. Atomic layer deposition of 50 nm of vanadium oxide on the surface of Al NW allows fabrication of supercapacitor electrodes with volumetric capacitance in excess of 1400 F·cc(-3), which exceeds the capacitance of traditional activated carbon supercapacitor electrodes by more than an order of magnitude.

Перевод пока недоступен

Идентификаторы

DOI: 10.1021/nn202979y

Цитирования и источники

Цитирований: 2Использованных источников: 0

Показатели — AkademScholar