Processing of teeth of saw blades of cotton processing machines with a stream of compressed air with abrasive particles
Illarion ShinTashkent Institute of Textile and Light Industry, 100100 Tashkent, UzbekistanZokhir ShodmonqulovTashkent Institute of Textile and Light Industry, 100100 Tashkent, UzbekistanS. R. NazarovTashkent Institute of Textile and Light Industry, 100100 Tashkent, UzbekistanNigora IskandarovaTashkent Institute of Textile and Light Industry, 100100 Tashkent, Uzbekistan
ABI
Аннотация
In the article, it is presented materials on abrasive blasting of teeth of saw blades of cotton processing machines with particles of black silicon carbide. The micro-profile of the surface, characterized by the height and pitch of irregularities, after microcutting with abrasive particles is able to intensify the process of fiber separation by activating the tank surfaces of the teeth. This machining process is also accompanied by deformation hardening of the surface layer of the teeth, leading to an increase in the wear resistance and durability of the saws.
Перевод пока недоступен