Статья

Experimental studies of pneumatic disc atomizer for low volume spraying

Burxon Utepov"Tashkent Institute of Irrigation and Agricultural Mechanization Engineers" National Research University, Tashkent, 100000, UzbekistanTuygun Khaydarov"Tashkent Institute of Irrigation and Agricultural Mechanization Engineers" National Research University, Tashkent, 100000, UzbekistanNurmamat Rajabov"Tashkent Institute of Irrigation and Agricultural Mechanization Engineers" National Research University, Tashkent, 100000, UzbekistanGulnoza Murtazayeva"Tashkent Institute of Irrigation and Agricultural Mechanization Engineers" National Research University, Tashkent, 100000, UzbekistanBakhtiyor Tulaganov"Tashkent Institute of Irrigation and Agricultural Mechanization Engineers" National Research University, Tashkent, 100000, UzbekistanMirzoolim Avliyakulov

E3S Web of Conferencesjournal2023en

ABI

Аннотация

The article presents the results of experimental studies to determine the dependence of the rotational speed of a pneumatic disc sprayer with coaxial air flow on the flow rate of the working fluid. To refine the parameters of the working body, studies were carried out within the liquid flow rate q , corresponding to the first and second spraying modes, at different rotation speeds ω, the working body's radius r , and the number of radial channels n p . At the same time, the mass of the rotating part of the pneumatic disk atomizer was determined. The quality of dispersion of the working fluid obtained experimentally by a multi-disk atomizer in a film version driven by an air flow corresponds to a low-volume liquid atomization mode.

Перевод пока недоступен

Темы

Aerosol Filtration and Electrostatic Precipitation Plant Surface Properties and Treatments Cyclone Separators and Fluid Dynamics

Идентификаторы

DOI: 10.1051/e3sconf/202336504033

Цитирования и источники

Цитирований: 6 Использованных источников: 10

Показатели — AkademScholar