Software for optimization of beam output during electron beam welding of thin-walled structures
В С ТынченкоBauman Moscow State Technical University, 5/1, 2nd Bauman st., Moscow, 105005, Russia FederationSergei KurashkinReshetnev Siberian State University of Science and Technology, 31, Krasnoyarsky Rabochy Av., Krasnoyarsk, 660037, Russian FederationAlexander MuryginReshetnev Siberian State University of Science and Technology, 31, Krasnoyarsky Rabochy Av., Krasnoyarsk, 660037, Russian FederationА Н БочаровReshetnev Siberian State University of Science and Technology, 31, Krasnoyarsky Rabochy Av., Krasnoyarsk, 660037, Russian FederationYuriy SereginReshetnev Siberian State University of Science and Technology, 31, Krasnoyarsky Rabochy Av., Krasnoyarsk, 660037, Russian Federation
2022en
ABI
Аннотация
This work is devoted to the issue of beam output optimization during electron beam welding of thin-walled structures. Authors develop a model for optimizing the electron beam output mode, which considers the dynamics of the thermal process in the welded joint zone and depends on the electron beam input mode, the geometric dimensions of the product, and the technological parameters used in the welding process. Based on the proposed approach, a prototype of a software control system for electron beam welding with optimization of the electron beam output was implemented, which allows control at all stages of the technological process.
Перевод пока недоступен
Идентификаторы
Цитирования и источники
Цитирований: 3Использованных источников: 0