Статья

Chemical resistance of sulfur concrete

Владимир ЕрофеевDepartment of Building Materials and Technologies, National Research Ogarev Mordovia State University, 68 Bolshevistskaya st., Saransk, 430005, Russian FederationL. YaushevaDepartment of Building Materials and Technologies, National Research Ogarev Mordovia State University, 68 Bolshevistskaya st., Saransk, 430005, Russian FederationAlexey BulgakovDepartment of Mechatronic, South-Russian State Polytechnic University (NPI), 132 Prosveshcheniya Str., Novocherkassk 346428, Russian FederationAlexander Anatolyevich BobryshevKazan Federal University, 420008 the Republic of Tatarstan Kazan 18 Kremlyovskaya street, Russian FederationЛ Н ШафигуллинKazan Federal University, 420008 the Republic of Tatarstan Kazan 18 Kremlyovskaya street, Russian FederationVictor AfoninDepartment of Automated Information Processing and Control Systems, National Research Ogarev Mordovia State University, 68 Bolshevistskaya st., Saransk, 430005, Russian Federation

2023en

ABI

Аннотация

One of the effective ways to increase the durability of building products and structures operating under the influence of aggressive media is using sulfur binders to manufacture concretes. It is shown that the chemical resistance of sulfur concretes to a greater extent depends on the chemical resistance of the matrix composition. It was found that the introduction of modified additives increases their chemical resistance. With the optimal content of additives, the water resistance of the composites increases from 2.3 to 3.2 times in comparison with the composition without additives. The highest chemical resistance in alkaline media and solvents and oils is characteristic of compositions filled with pyrite cinders. Formulations filled with quartz powder showed increased chemical resistance in acid solutions.

Перевод пока недоступен

Идентификаторы

DOI: 10.1063/5.0118294

Цитирования и источники

Цитирований: 2Использованных источников: 0

Показатели — AkademScholar