Статья

Energy consumption during impact cutting of canola stalk as a function of moisture content and cutting height

Mohsen AzadbakhtDepartment of Agricultural Machinery Engineering, Gorgan University of Agricultural Sciences and Natural Resources, Gorgan, IranEbrahim EsmaeilzadehDepartment of Agricultural Machinery Engineering, Gorgan University of Agricultural Sciences and Natural Resources, Gorgan, IranMostafa Esmaeili ShayanDepartment of Agricultural Machinery Engineering, Gorgan University of Agricultural Sciences and Natural Resources, Gorgan, Iran

2013en

ABI

Аннотация

This study surveys the needed energy for cutting canola stems in different levels of cutting height and moisture content. The canola was harvested from the experimental farm in Gorgan, Iran. Test device fabricated and then calibrated. The device works on the principle of conservation of energy. The tests were repeated 15 times for any level of moisture content and cutting height and they were analyzed using split plot design. The results showed the effect of height and moisture content on cutting energy is significant (P < 1%), but their interaction is not significant. The highest cutting energy was 1.1 kJ in 25.5 (w.b.%) moisture content and 10 cm cutting height. Also the minimum cutting energy was 0.76 kJ in 11.6 (w.b.%) moisture content and 30 cm cutting height. Blade velocity was 2.64 m/s in cutting moment.

Перевод пока недоступен

Идентификаторы

DOI: 10.1016/j.jssas.2013.10.002

Цитирования и источники

Цитирований: 2Использованных источников: 0

Показатели — AkademScholar