Статья

Numerical Integration Method for Prediction of Milling Stability

Ye DingState Key Laboratory of Mechanical System and Vibration, School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai 200240, ChinaLiMin ZhuState Key Laboratory of Mechanical System and Vibration, School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai 200240, ChinaXiaojian ZhangState Key Laboratory of Digital Manufacturing Equipment and Technology, School of Mechanical Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, ChinaHan DingState Key Laboratory of Mechanical System and Vibration School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China e-mail:

2011en

ABI

Аннотация

This paper presents a numerical scheme to predict the milling stability based on the integral equation and numerical integration formulas. First, the milling dynamics taking the regenerative effect into account is represented in the form of integral equation. Then, the tooth passing period is precisely divided into the free vibration phase during which the analytical solution is available and the forced vibration phase during which an approximate solution is needed. To obtain the numerical solution of the integral equation during the forced vibration phase, the time interval of interest is equally discretized. Over each small time interval, Newton-Cotes integration formulas or Gauss integration formulas are employed to approximate the integral term in the integral equation. After establishing the state transition matrix of the system in one period, the milling stability is predicted by using Floquet theory. The benchmark examples are utilized to verify the proposed approach. The results demonstrate that it is highly efficient and accurate.

Перевод пока недоступен

Идентификаторы

DOI: 10.1115/1.4004136

Цитирования и источники

Цитирований: 6Использованных источников: 0

Показатели — AkademScholar