Мақола

The Influence of Technological Regimes of Synthesizing a Solar Furnace on the Phase Composition of TiO2-CuO Cermets and the Optical Properties of Coatings on Their Basis

С. Х. СулеймановPhysics-Sun Institute of Materials Science of the Research and Production Association, Tashkent, 100084, UzbekistanВ. Г. ДыскинPhysics-Sun Institute of Materials Science of the Research and Production Association, Tashkent, 100084, UzbekistanМ. У. ДжанкличPhysics-Sun Institute of Materials Science of the Research and Production Association, Tashkent, 100084, UzbekistanO. A. DudkoPhysics-Sun Institute of Materials Science of the Research and Production Association, Tashkent, 100084, UzbekistanН. А. КулагинаPhysics-Sun Institute of Materials Science of the Research and Production Association, Tashkent, 100084, Uzbekistan

Technical Physicsjournal2018en

ABI

Аннотация

We present the results of studying the effect of technological synthesis regimes of a solar furnace using the method of a partial metal reduction of one of the oxides on the phase formation of cermet composite materials of the TiO2-CuO system. It has been established that the phase composition of the synthesized cermet composite materials depends on the carbon concentration, melting temperature and cooling rate. The dependence of the spectral-optical properties of selectively absorbing coatings on the production technology and properties of synthesized composite materials has been presented. It has been found that the coatings fabricated by melting in air with overheating at a melt cooling rate of about 105–106°C/s have the highest values of the integral absorption coefficient, α s = 91.0–94.5%.

Ҳали таржима қилинмаган

Мавзулар

Copper-based nanomaterials and applications Solar Thermal and Photovoltaic Systems

Идентификаторлар

DOI: 10.1134/s1063784218010243

Иқтибослар ва манбалар

2 та иқтибос 6 та фойдаланилган манба

Кўрсаткичлар — AkademScholar · Тез орада