Асосий контентга ўтиш
AkademIndex

Маҳсулотлар

Ишлаб чиқувчилар учун

AkademBaseЭкотизим учун очиқ API
Мақола

Spread waves in a viscoelastic cylindrical body of a sector cross section with cutouts

Mirziyod MirsaidovTashkent Institute of Irrigation and Agricultural Mechanization Engineers, 39, st. Kari-Niyazi, Tashkent, Republic of UzbekistanIsmoil SafarovTashkent Institute of Chemical Technology, 32, st. Navoi, Tashkent, Republic of UzbekistanZ I BoltayevBukhara Engineering and Technology Institute, ul. K. Murtazaev, 14, Bukhara, Republic of UzbekistanM. Kh. TeshaevBukhara Engineering and Technology Institute, ul. K. Murtazaev, 14, Bukhara, Republic of Uzbekistan
ABI

Аннотация

Abstract In this article an analysis of well-known works related to wave propagation and dispersion dependences in a cylindrical waveguide are presented. A mathematical model, methodology and algorithm for solving the problem of wave propagation in a cylindrical waveguide, having a sector cut are developed. The obtained equations are solved by the orthogonal sweep method in combination with the Mueller and Gauss methods. The dispersion relation for a viscoelastic cylindrical waveguide, having a sector cut in cross section at an arbitrary angle is obtained. Based on the obtained results, it was found that, there are no waves in the elastic cylinder of a sector section with real parts of the phase velocity. It has been established that, in the case of a wedge-shaped viscoelastic cylindrical panel, for each mode, there are limiting wave propagation velocities and they change with a change in the radius of curvature. The spectral sets of normal waves with an increase in the angular parameter of the sector cut-out, corresponding to lower non-zero frequencies of wave locking, slowly decrease.

Ҳали таржима қилинмаган

Мавзулар

Идентификаторлар

Иқтибослар ва манбалар

Кўрсаткичлар — AkademScholar · Тез орада