EXPERIMENTAL RESULTS ON JUSTIFICATION OF PARAMETERS OF A COTTON CLEANER WITH A NEW DRIVE DESIGN
Dilrabo МamatovaDepartment of Machine Science and Service, Tashkent Institute of Textile and Light Industry, Tashkent, Uzbekistan.Аnvar DjuraevDepartment of Machine Science and Service, Tashkent Institute of Textile and Light Industry, Tashkent, Uzbekistan.Alisher MamatovDepartment of Mathematic and IT, Tashkent Institute of Textile and Light Industry, Tashkent, Uzbekistan.Аbbos NematovDepartment of Machine Science and Service, Tashkent Institute of Textile and Light Industry, Tashkent, Uzbekistan.T KulievA DzhuraevShChorievA DjuraevDepartment of Machine Science and Service, Tashkent Institute of Textile and Light Industry, Tashkent, Uzbekistan.R MaksudovV TurdalievD MamatovaMamatovaDjuraevM A MamatovTurgunovDilrabo MamatovaAnvar DjuraevDepartment of Machine Science and Service, Tashkent Institute of Textile and Light Industry, Tashkent, Uzbekistan.A PlekhanovL SarttarovaD Dikenova
ABI
Аннотация
The article provides an analysis of the state of technical equipment for cleaning fibrous materials, including raw cotton from fine and coarse litter. The scheme of the drive of the cotton-cleaning unit including belt drives with eccentric tension rollers with elastic elements is presented. The results of experimental studies of a belt drive with variable gear ratio, including a composite eccentric tension roller, used in the drive of a cotton-cleaning unit of installation cotton ginning complex (ICGC), are analyzed. On the basis of full-factor experimental studies, the optimal values of the drive parameters have been determined, which allow obtaining a high cleaning effect.
Ҳали таржима қилинмаган
Мавзулар
Идентификаторлар
Иқтибослар ва манбалар
0 та иқтибос4 та фойдаланилган манба
Кўрсаткичлар — AkademScholar · Тез орада