Ушбу иш иқтибос қилган ишлар

48 та иш

Иш: Modeling of casting technology of large-sized ingots from deformable aluminum alloys

Investigation of mechanical properties of cold-rolled, annealed and welded semi-finished products from the test alloys of Al-Mg system, economically alloyed with scandium
V. N. Baranov, S. B. Sidelnikov, В. Ф. Фролов +6
Мақола20185 иқтибос
ABI
Temporal evolution of the nanostructure of Al(Sc,Zr) alloys: Part I – Chemical compositions of Al(ScZr) precipitates
Christian B. Fuller, James W. Murray, D. N. Seidman
Мақола20054 иқтибос
ABI
Combined Alloying of Aluminum Alloys with Scandium and Zirconium
В. В. Захаров
Мақола20144 иқтибос
ABI
Hardening of Aluminum Alloys Due to Scandium Alloying
В. В. Захаров, T. D. Rostova
Мақола20144 иқтибос
ABI
Structure, phase composition, and strengthening of cast Al–Ca–Mg–Sc alloys
Н. А. Белов, Е. А. Наумова, T. A. Bazlova +1
Мақола20164 иқтибос
ABI
Effect of solidification cooling rate on kinetics of continuous/discontinuous Al3(Sc,Zr) precipitation and the subsequent age-hardening response in cold-rolled AlMgSc(Zr) sheets
Qingshan Dong, Andrew Howells, David J. Lloyd +2
Мақола20194 иқтибос
ABI
Multiscale characterization of the nucleation and 3D structure of Al3Sc phases using electron microscopy and synchrotron X-ray tomography
Yuliang Zhao, Weiwen Zhang, Billy Koe +9
Мақола20204 иқтибос
ABI
Investigation of the hardening behavior during recrystallization annealing in Al-Mg-Sc alloy
Jianxin Xie, X.P. Chen, L. Mei +2
Мақола20204 иқтибос
ABI
Mechanical properties and microstructure of multi-pass butt weld of plates made of Al-Mg-Zr alloy sparingly doped with scandium
Nikolay N. Dovzhenko, A. I. Demchenko, Andrey Alekseevich Bezrukikh +7
Мақола20214 иқтибос
ABI
Transmission electron microscopy studies on the effect of strain on Al and Al–1% Sc alloy
V. Rajinikanth, Vikas Jindal, V. G. Akkimardi +2
Мақола20073 иқтибос
ABI
Recrystallization features of deformable aluminium-magnesium alloys with scandium
Yu.D. Koryagin, Sergii Ilin
Мақола20173 иқтибос
ABI
Discontinuous Precipitation of Nano-Al<sub>3</sub>Sc Particles in Al-Sc Alloy and Its Effect on Mechanical Property
Weigui Zhang, Yanmiao Wu, Hongyu Lu +4
Мақола20183 иқтибос
ABI
Study on the influence of heat treatment modes on mechanical and corrosion properties of rolled sheet products from a new aluminum alloy, economically alloyed with scandium
E. Yu. Zenkin, V. N. Baranov, S. B. Sidelnikov +6
Мақола20193 иқтибос
ABI
Al3(Sc, Zr) precipitation in deformed Al-Mg-Mn-Sc-Zr alloy: Effect of annealing temperature and dislocation density
Jingyu Jiang, Feng Jiang, Menghan Zhang +2
Мақола20203 иқтибос
ABI
Effect of continuity of annealing time on the recrystallization behavior of Al-Mg-Mn-Sc-Zr alloy
Jingyu Jiang, Feng Jiang, Menghan Zhang +2
Мақола20203 иқтибос
ABI
The effects of scandium heterogeneous distribution on the precipitation behavior of Al3(Sc, Zr) in aluminum alloys
Yuqiao Sun, Qinglin Pan, Yuhong Luo +7
Мақола20213 иқтибос
ABI
Study on the dynamic and static softening phenomena in Al–6Mg alloy during two-stage deformation through interrupted hot compression test
Hesam Pouraliakbar, Mehdi Pakbaz, Soheil Firooz +2
Мақола20152 иқтибос
ABI
Kinetics of Decomposition of the Solid Solution of Scandium in Aluminum in Binary Al – Sc Alloys
В. В. Захаров
Мақола20152 иқтибос
ABI
Research of rolling regimes and mechanical properties of cold-rolled, annealed and welded semi-finished products from experimental alloys of Al – Mg system, economically alloyed by scandium
V. N. Baranov, S. B. Sidelnikov, A. I. Bezrukikh +2
Мақола20172 иқтибос
ABI
Recrystallization behavior of Al-Mg-Mn-Sc-Zr alloy based on two different deformation ways
Jingyu Jiang, Feng Jiang, Menghan Zhang +2
Мақола20202 иқтибос
ABI
Morphological characteristics of Al3Sc particles and crystallographic orientation relationships of Al3Sc/Al interface in cast Al-Sc alloy
Kang Yan, Zhenjiao Chen, Yan Zhao +3
Мақола20202 иқтибос
ABI
Сарлавҳасиз
Бошқа1 иқтибос
ABI
Сарлавҳасиз
Бошқа1 иқтибос
ABI