Ушбу иш иқтибос қилган ишлар

85 та иш

Иш: Metrological Comparison of Available Methods to Correct Edge-Effect Local Plasticity in Instrumented Indentation Test

Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology
W. C. Oliver, George M. Pharr
Мақола20046 иқтибос
ABI
Single-step calibration method for nano indentation testing machines
Maurizio Galetto, Gianfranco Genta, Giacomo Maculotti
Мақола20204 иқтибос
ABI
Effects of 'sinking in' and 'piling up' on estimating the contact area under load in indentation
Yang‐Tse Cheng, Che-Min Cheng
Мақола19983 иқтибос
ABI
Nanoindentation: Measuring methods and applications
D.A. Lucca, Konrad Herrmann, M.J. Klopfstein
Мақола20103 иқтибос
ABI
Indentation size effects in crystalline materials: A law for strain gradient plasticity
William D. Nix, Huajian Gao
Мақола19983 иқтибос
ABI
A comparison of nanoindentation pile-up in bulk materials and thin films
Noushin Moharrami, S.J. Bull
Мақола20143 иқтибос
ABI
Uncertainty evaluation of indentation modulus in the nano-range: Contact stiffness contribution
Giulio Barbato, Gianfranco Genta, Roberto Cagliero +4
Мақола20173 иқтибос
ABI
Instrumented Indentation Test in the Nano-range: Performances Comparison of Testing Machines Calibration Methods
Maurizio Galetto, Giacomo Maculotti, Gianfranco Genta +2
Мақола20193 иқтибос
ABI
Germanium: A review of its US demand, uses, resources, chemistry, and separation technologies
Madhav Patel, Athanasios K. Karamalidis
Шарҳ мақола20213 иқтибос
ABI
High-Precision Calibration of Indenter Area Function and Instrument Compliance
T. Chudoba, Dieter Schwenk, Philipp Reinstädt +1
Мақола20223 иқтибос
ABI
Calibration of machine platform nonlinearity in Instrumented Indentation Test in the macro range
Jasurkhuja Kholkhujaev, Giacomo Maculotti, Gianfranco Genta +1
МақолаMetal and Thin Film MechanicsPrecision Engineering20233 иқтибос
ABI
Electrode materials for lithium-ion batteries
Amit Kumar Mishra, Akansha Mehta, Soumen Basu +5
Мақола20182 иқтибос
ABI
Uncertainty-based comparison of conventional and surface topography-based methods for wear volume evaluation in pin-on-disc tribological test
Giacomo Maculotti, Edoardo Goti, Gianfranco Genta +2
Мақола20212 иқтибос
ABI
Mapping of mechanical properties of WC–Co using nanoindentation
Håkan Engqvist, Urban Wiklund
Мақола20002 иқтибос
ABI
Indentation of self-similar indenters: An FEM-assisted energy-based analysis
Fabian Pöhl, S. Huth, W. Theisen
Мақола20142 иқтибос
ABI
Electrical resistance of metallic contacts on silicon and germanium during indentation
George M. Pharr, W. C. Oliver, Robert F. Cook +4
Мақола19922 иқтибос
ABI
Exploiting interactions between structure size and indentation size effects to determine the characteristic dimension of nano-structured materials by indentation
Xiaodong Hou, N.M. Jennett, Magdalena Parlińska‐Wojtan
Мақола20132 иқтибос
ABI
Investigations of new possibilities in the calibration of diamond hardness indenters geometry
Alessandro Germak, Claudio Origlia
Мақола20102 иқтибос
ABI
The Indentation Size Effect: A Critical Examination of Experimental Observations and Mechanistic Interpretations
George M. Pharr, Erik G. Herbert, Yanfei Gao
Мақола20102 иқтибос
ABI
Correction of the hardness measurement for pile-up materials with a nano indentation machine
Moon Shik Park
Мақола20162 иқтибос
ABI
Instrumented Indentation Test: Contact Stiffness Evaluation in the Nano-range
Giacomo Maculotti, Gianfranco Genta, Massimo Lorusso +3
Мақола20182 иқтибос
ABI
Assessment of Heat Treatment Effect on AlSi10Mg by Selective Laser Melting through Indentation Testing
Giacomo Maculotti, Gianfranco Genta, Massimo Lorusso +1
Мақола20192 иқтибос
ABI
Metrological characteristics for the calibration of surface topography measuring instruments: a review
Richard Leach, Han Haitjema, Rong Su +1
Шарҳ мақола20202 иқтибос
ABI
Сарлавҳасиз
Бошқа2 иқтибос
ABI
Сарлавҳасиз
Бошқа1 иқтибос
ABI