Асосий контентга ўтиш
AkademIndex

Маҳсулотлар

Ишлаб чиқувчилар учун

AkademBaseЭкотизим учун очиқ API
← Ишга қайтиш

Ушбу иш иқтибос қилган ишлар

40 та иш

Иш: Influence of the Parameters of Combined Processing and Drawing on the Structure and Properties of Conductor Semi-finished Products From Aluminum Alloys with Additives of Rare Earth and Transition Metals

  1. Critical Assessment 36: Assessing differences between the use of cerium and scandium in aluminium alloying

    Frank Czerwiński

    Мақола20199 иқтибос
    ABI

  2. Ambient- and high-temperature mechanical properties of isochronally aged Al–0.06Sc, Al–0.06Zr and Al–0.06Sc–0.06Zr (at.%) alloys

    Keith E. Knipling, David N. Seidman, David C. Dunand

    Мақола20108 иқтибос
    ABI

  3. Comparative analysis of alloying additives as applied to the production of heat-resistant aluminum-base wires

    Н. А. Белов, A. N. Alabin, A. R. Teleuova

    Мақола20126 иқтибос
    ABI

  4. Mechanisms for Ce-induced remarkable improvement of conductivity in Al alloys

    Hengcheng Liao, Ye Liu, Changlüe Lü +1

    Мақола20165 иқтибос
    ABI

  5. Investigation structure and properties of wire from the alloy of AL-REM system obtained with the application of casting in the electromagnetic mold, combined rolling-extruding, and drawing

    S. B. Sidelnikov, Денис Сергеевич Ворошилов, M. M. Motkov +8

    МақолаMetallurgy and Material FormingThe International Journal of Advanced Manufacturing Technology20214 иқтибос
    ABI

  6. Mechanical and electrical properties of an ultrafine grained Al–8.5 wt. % RE (RE = 5.4 wt.% Ce, 3.1 wt.% La) alloy processed by severe plastic deformation

    M. Yu. Murashkin, I. Sabirov, A. E. Medvedev +4

    Мақола20154 иқтибос
    ABI

  7. The improved effects by the combinative addition of lanthanum and samarium on the microstructures and the tensile properties of high-pressure die-cast Mg–4Al-based alloy

    Qiang Yang, Fanqiang Bu, Fanzhi Meng +5

    Мақола20154 иқтибос
    ABI

  8. Effects of La addition on the microstructure and tensile properties of Al-Si-Cu-Mg casting alloys

    Tao Lü, Pan Ye, Jili Wu +2

    Мақола20154 иқтибос
    ABI

  9. Effect of the Thermomechanical Processing on Microstructure and Properties of an Al-Ce Alloy

    Anna Mogucheva, Dmitry Zyabkin, Rustam Kaibyshev

    Мақола20124 иқтибос
    ABI

  10. Effects of La addition on the elevated temperature properties of the casting Al–Cu alloy

    Dongming Yao, Yumei Xia, Feng Qiu +1

    Мақола20104 иқтибос
    ABI

  11. Effects of La addition on the mechanical properties and thermal-resistant properties of Al–Mg–Si–Zr alloys based on AA 6201

    Wuhua Yuan, Zhenyu Liang, Chuanyang Zhang +1

    Мақола20114 иқтибос
    ABI

  12. Microstructure Evolution of Al-0.35%Si-0.2%Mg-0.3%Ce Alloy During Hot Extrusion and Its Contributions to Performances

    Hengcheng Liao, Yuna Wu, Yongjin Wang

    Мақола20154 иқтибос
    ABI

  13. Effect of trace La addition on the microstructure and mechanical property of as-cast ADC12 Al-Alloy

    Xin Huang, Hong Yan

    Мақола20134 иқтибос
    ABI

  14. Computational-and-experimental evaluation of the implementation condition of combined rolling–pressing using the power balance method

    Н. Н. Загиров, Nikolay N. Dovzhenko, S. B. Sidelnikov +1

    Мақола20164 иқтибос
    ABI

  15. Microstructure evolution and mechanical properties of Al-La alloys with varying La contents

    Yang He, Jianhua Liu, Shengtao Qiu +3

    Мақола20174 иқтибос
    ABI

  16. Effect of Trace Elements La, Ti and Homogenization on Electrical Properties of Pure Aluminum

    Wei Feng, Jian Mao, Liu Chunfang +1

    Мақола20184 иқтибос
    ABI

  17. Effect of the eutectic Al-(Ce,La) phase morphology on microstructure, mechanical properties, electrical conductivity and heat resistance of Al-4.5(Ce,La) alloy after SPD and subsequent annealing

    A. E. Medvedev, M. Yu. Murashkin, Nariman A. Enikeev +4

    Мақола20194 иқтибос
    ABI

  18. Cerium in aluminum alloys

    Frank Czerwiński

    Мақола20194 иқтибос
    ABI

  19. The difference of La and Ce as additives of electrical conductivity aluminum alloys

    Yuliang Zhang, Feng Wei, Jian Mao +1

    Мақола20194 иқтибос
    ABI

  20. Development of Combined Machining Modes, Investigation of Mechanical Properties and Structure of Deformed Semi-Finished Products from Alloy 01417

    S. B. Sidelnikov, Денис Сергеевич Ворошилов, M. M. Motkov +2

    Мақола20204 иқтибос
    ABI

  21. On the Al–Al11Ce3 Eutectic Transformation in Aluminum–Cerium Binary Alloys

    Frank Czerwiński, Babak Shalchi Amirkhiz

    Мақола20204 иқтибос
    ABI

  22. Effect of rare earth elements on the microstructure and properties of a die-cast aluminum alloy

    Ruixiang Zhu, Yong Su, Xinyu Qin +2

    Мақола20193 иқтибос
    ABI

  23. Properties and structure of Al-Zr-Fe-Si alloy after thermomechanical treatment

    Alexander Kalinenko, A. Morozova, D. Bukin +1

    Мақола20183 иқтибос
    ABI

  24. Effect of annealing on microstructure, strength and electrical conductivity of the pre-aged and HPT-processed Al-0.4Zr alloy

    T. S. Orlova, T. A. Latynina, A. M. Mavlyutov +2

    Мақола20183 иқтибос
    ABI

  25. Influence of Severe Plastic Deformation on Microstructure, Strength and Electrical Conductivity of Aged Al–0.4Zr(Wt.%) Alloy

    T. S. Orlova, A. M. Mavlyutov, T. A. Latynina +5

    Мақола20183 иқтибос
    ABI