Мақола

Sliding parameters of a two-roll module for leather pressing

K. K. TurgunovTashkent Institute of Architecture and Civil Engineering, Navoi Street, 13, Tashkent, UzbekistanKakhramon AliboevTashkent Institute of Architecture and Civil Engineering, Navoi Street, 13, Tashkent, UzbekistanAkmal RasulevTashkent Institute of Architecture and Civil Engineering, Navoi Street, 13, Tashkent, Uzbekistan

AIP conference proceedingsjournal2024en

ABI

Аннотация

Calculation formulas for the magnitude and angles of delay and advance sliding are derived. It was determined that with an increase in the projection of external forces on the ordinate axis and a decrease in the projection of external forces on the abscissa axis, the zone of delay sliding increases, and the advance sliding zone decreases. It was found that with an increase in leather feed rate, the delay angle decreases, and the advance angle increases.

Ҳали таржима қилинмаган

Мавзулар

Advanced Surface Polishing Techniques Advanced machining processes and optimization Engineering Technology and Methodologies

Идентификаторлар

DOI: 10.1063/5.0182657

Иқтибослар ва манбалар

1 та иқтибос 16 та фойдаланилган манба

Кўрсаткичлар — AkademScholar · Тез орада