Мақола

A Study of the Influence of a Nanostructured Activating Component in Welding Electrodes on the Formation of Welding Beads

Rustam SaidovNanostructured Smart Materials Laboratory, Institute of Material Sciences, Academy of Science of Uzbekistan, Chingiz Aytmatov Street. 2B, Tashkent 100084, UzbekistanRustam RakhimovNanostructured Smart Materials Laboratory, Institute of Material Sciences, Academy of Science of Uzbekistan, Chingiz Aytmatov Street. 2B, Tashkent 100084, UzbekistanKamel TouilebDepartment of Mechanical Engineering, College of Engineering in Al-Kharj, Prince Sattam Bin Abdulaziz University, P.O. 655, Al-Kharj 16273, Saudi ArabiaJoffine PonoreDepartment of Mechanical Engineering, College of Engineering in Al-Kharj, Prince Sattam Bin Abdulaziz University, P.O. 655, Al-Kharj 16273, Saudi Arabia

Crystalsjournal2026en

ABI

Аннотация

The objective of this work was to investigate the effect of a special activating component, under the ZB-3 brand, on the welding and technological properties of a welding electrode when incorporated into the coating of a rutile welding electrode. Pulsed radiation activation was used to produce the nanostructured activating component ZB-3. The results showed the beneficial effect of the electrode doped with ZB-3 on the formation of welding beads. At the same time, an improvement in the quality of weld formation is observed with a ZB-3 activator content of up to 8%. The qualities of the weld formation were significantly improved. Also, an increase in the breaking length of the electrode arc by more than 10% was established with a ZB-3 activator content of up to 2%, and the depth of penetration of the welded metal increased to 40%.

Ҳали таржима қилинмаган

Мавзулар

Engineering and Environmental Studies Surface Treatment and Coatings Advanced Theoretical and Applied Studies in Material Sciences and Geometry

Идентификаторлар

DOI: 10.3390/cryst16030205

Иқтибослар ва манбалар

0 та иқтибос18 та фойдаланилган манба

Кўрсаткичлар — AkademScholar