Мақола

Taguchi DOE Analysis of Surface Integrity for High Pressure Jet Assisted Machining of Inconel 718

Lokman YünlüMSc,Suleyman Demirel University, Faculty of Technology Department of Manufacturing Engineering, Isparta, 32260, TurkeyOğuz ÇolakAssoc. Prof. Dr. Suleyman Demirel University, Faculty of Technology Department of Manufacturing Engineering, Isparta, 32260, TurkeyCahit KurbanoğluProf. Dr., Medeniyet University, Faculty of Engineering, Department of Mechanical Engineering, D-100 Karayolu Merdivenköy Mah. KADIKOY No:6/1, İSTANBUL, 34800, Turkey

2014en

ABI

Аннотация

This paper presents the results of Taguchi DOE (Design of Experiment) investigation to determine the effects of High pressure jet assisted coolant on surface integrity in machining of Inconel 718 aerospace superalloys. Designed experiments were performed under conventional (0.6 MPa) and High pressure jet assisted cooling (15 MPa and 30 MPa) conditions using (Ti,Al)N+TiN coated carbide cutting tool. L9 (34) Taguchi experimental techniques were used in the analyzing of the machined surface and subsurface: surface roughness measuring device for surface roughness, and X-ray diffraction (XRD) technique was used to determine residual stresses and phase changes induced by conventional and High pressure jet assisted machining coolant. The results show the benefits and the future potential of High pressure jet assisted cooling for surface integrity enhancement to achieve improved product's functional performance in superalloys machining.

Ҳали таржима қилинмаган

Идентификаторлар

DOI: 10.1016/j.procir.2014.04.056

Иқтибослар ва манбалар

2 та иқтибос0 та фойдаланилган манба

Кўрсаткичлар — AkademScholar