M Umidjon

9 ta ish

1. FRICTION AND WEAR PROCESSES IN TRIBOTECHNICAL SYSTEM

   Sh Karimov, Mamirov Sh, Bektemirov B. Sh +18

   MaqolaOAOchiq kirishMechanical and Thermal Properties AnalysisInternational Journal of Mechatronics and Applied Mechanics202117 iqtibos

   ABIABI:AkademIndex/2021.article.000280

2. THE DIFFERENCE BETWEEN THE EFFECT OF ELECTROMAGNETIC AND MAGNETIC FIELDS ON THE VISCOSITY COEFFICIENTS OF CUTTING FLUIDS USED IN CUTTING PROCESSES

   Umidjon Mardonov, Muhammad Turonov, Andrey Jeltukhin +54

   MaqolaOAOchiq kirishCoal Combustion and Slurry ProcessingInternational Journal of Mechatronics and Applied Mechanics202111 iqtibos

   ABIABI:AkademIndex/2021.article.000370

3. DEVELOPMENT OF 280X29NL ALLOY LIQUEFACTION TECHNOLOGY TO INCREASE THE HARDNESS AND CORROSION RESISTANCE OF CAST PRODUCTS

   Turaxodjaev Nodir, Saidmakhamadov Nosir, Saidkhodjaeva Shokhista +36

   MaqolaOAOchiq kirishMetallurgy and Material FormingInternational Journal of Mechatronics and Applied Mechanics20216 iqtibos

   ABIABI:AkademIndex/2026.other.271067

4. THE EFFECT OF LITHIUM CONTENT ON THE MASS OF THE PART WHEN ALLOYED WITH LITHIUM ALUMINUM

   Turakhodjaev Nodir, Tursunbaev Sarvar, Karimov Kamaldjan +60

   MaqolaOAOchiq kirishAluminum Alloy Microstructure PropertiesInternational Journal of Mechatronics and Applied Mechanics20224 iqtibos

   ABIABI:AkademIndex/2022.article.000526

5. THE PROPERTIES OF HIGH-SPEED STEEL Р6М5, DEPENDING ON THE COMBINED CHEMICAL HEAT TREATMENT

   Begatov Mukhammadjonovich, Sobirov Bekzodbek Ahmadjonovich, Makhmuda Yakubova +60

   MaqolaOAOchiq kirishMaterial Properties and ApplicationsInternational Journal of Mechatronics and Applied Mechanics20222 iqtibos

   ABIABI:AkademIndex/2022.article.001577

6. DEVELOPMENT OF A MATHEMATICAL MODEL FOR AUTOMATING THE SELECTION OF EFFECTIVE TECHNOLOGICAL ZONES FOR THE PLACEMENT OF PTM COMPONENTS WITH VISCOELASTIC LINKS IN DYNAMIC CONTROL

   Alisher Mamadjanov, Zayniddin Mukhiddinov, Sarvar Nabiyev +26

   MaqolaOAOchiq kirishIndustrial Engineering and TechnologiesInternational Journal of Mechatronics and Applied Mechanics20210 iqtibos

   ABIABI:AkademIndex/2021.article.010424

7. DETERMINATION OF THE STRESS-STRAIN STATE BY STAMPING EXTRUSION OF AXISYMMETRIC PARTS

   Ismailov Khasan, Abdullaev Fatkhulla, Akhmadaliev Shahkrukh +25

   MaqolaOAOchiq kirishEngineering Diagnostics and ReliabilityInternational Journal of Mechatronics and Applied Mechanics20210 iqtibos

   ABIABI:AkademIndex/2021.article.010667

8. TECHNOLOGIES FOR EXTRACTION OF COPPER FROM COPPER SLAG BY FLOTATION

   Turakhodjaev Nodir, Sherzod Tashbulatov, Shukhrat Chorshanbiev +55

   MaqolaOAOchiq kirishMinerals Flotation and Separation TechniquesInternational Journal of Mechatronics and Applied Mechanics20220 iqtibos

   ABIABI:AkademIndex/2022.article.006938

9. INVESTIGATION OF THE EFFECT OF SPECIAL THERMOCYCLIC TREATMENT ON THE DEFECTIVENESS OF THE CRYSTAL STRUCTURE OF TOOL STEELS AND THEIR MECHANICAL PROPERTIES

   A Mukhamedov, Shukurov Sh, S Dyachenko +46

   MaqolaOAOchiq kirishMaterial Properties and Failure MechanismsInternational Journal of Mechatronics and Applied Mechanics20220 iqtibos

   ABIABI:AkademIndex/2022.article.008833