Hisobot

SWAT4.0を用いたBWR燃料の照射後試験解析

Takeo KikuchiNuclear Data and Reactor Engineering Division , Nuclear Science and Engineering Center ,Kenichi TadaNuclear Data and Reactor Engineering Division , Nuclear Science and Engineering Center ,Takao SakinoNuclear Data and Reactor Engineering Division Nuclear Science and Engineering Center Sector of Nuclear Science Research 日本原子力研究開発機構Kenya SuyamaNuclear Data and Reactor Engineering Division Nuclear Science and Engineering Center Sector of Nuclear Science Research 日本原子力研究開発機構

2018ja

Ochiq kirishYashil

ABI

Annotatsiya

The criticality management of the fuel debris is one of the most important research issues in Japan. The current criticality management adopts the fresh fuel assumption. The adoption of the fresh fuel assumption for the criticality control of the fuel debris is difficult because the k$_{\rm eff}$ of the fuel debris could exceed 1.0 in most of cases which the fuel debris contains water and does not contain neutron absorbers such as gadolinium. Therefore, the adoption of the burnup credit is considered. The prediction accuracy of the isotopic composition of used nuclear fuel must be required to adopt the burnup credit for the treatment of the fuel debris. JAEA developed a burnup calculation code SWAT4.0 to obtain reference calculation results of the isotopic composition of the used nuclear fuel. This code is used to evaluate the composition of fuel debris. In order to investigate the prediction accuracy of SWAT4.0, we analyzed the PIE of BWR obtained from 2F2DN23.

Hali tarjima qilinmagan

Iqtiboslar va manbalar

0 ta iqtibos0 ta foydalanilgan manba