Maqola

High-Entropy Superhard Coatings Based on the AlTiCrVNbMo Alloy

В. Ф. ГорбаньFrantsevich Institute of Materials Research, National Academy of Sciences of Ukraine, Kyiv, UkraineА. А. АндреевKharkiv Physicotechnical Institute, National Research Center, Kharkiv, UkraineМ. О. KrapivkaFrantsevich Institute of Materials Research, National Academy of Sciences of Ukraine, 03142, Kyiv, UkraineV. А. StolbovoyKharkiv Physicotechnical Institute, National Research Center, Kharkiv, UkraineM. V. KarpetsFrantsevich Institute of Materials Research, National Academy of Sciences of Ukraine, Kyiv, UkraineS. A. FirstovFrantsevich Institute of Materials Research, National Academy of Sciences of Ukraine, Kyiv, UkraineA. M. ChikrizhovKharkiv Physicotechnical Institute, National Research Center, Kharkiv, Ukraine

2020en

Ochiq kirish: yoʻq

ABI

Annotatsiya

Coatings that consisted of the high-entropy AlTiCrVNbMo alloy were obtained by ion sputtering in plasma of compressed vacuum-arc discharge. The hardness of this metal coating is at the level of 18 GPa due to the presence of nanostructures along with cluster structures. Coatings made of this alloy in a nitrogen atmosphere are solid solutions based on an FCC lattice; the hardness of these coatings is in the range of 28–44 GPa and the combined elastic modulus is in the range of 255–340 GPa for coatings obtained in different technological modes. The hardness values of the oxide coatings are in the range of 33–35 GPa and the values of the combined elastic modulus are in the range of 280–290 GPa. The friction coefficient of this alloy depends on alloy hardness and ranges from 0.24 to 0.061.

Hali tarjima qilinmagan

Identifikatorlar

DOI: 10.3103/s1063457620050172

Iqtiboslar va manbalar

0 ta iqtibos11 ta foydalanilgan manba