Ushbu ishga iqtibos qilgan ishlar

16 ta ish

Ish: EFFECT OF MAGNETIC FIELD ON THE PHYSICAL AND CHEMICAL PROPERTIES OF FLOWING LUBRICATING COOLING LIQUIDS USED IN THE MANUFACTURING PROCESS

1. THE DIFFERENCE BETWEEN THE EFFECT OF ELECTROMAGNETIC AND MAGNETIC FIELDS ON THE VISCOSITY COEFFICIENTS OF CUTTING FLUIDS USED IN CUTTING PROCESSES

   Umidjon Mardonov, Muhammad Turonov, Andrey Jeltukhin +54

   MaqolaOAOchiq kirishCoal Combustion and Slurry ProcessingInternational Journal of Mechatronics and Applied Mechanics202111 iqtibos

   ABIABI:AkademIndex/2021.article.000370

2. Research of Technological Modes of Production of Small Diameter Rods from Niobium

   Tilavov Yunus Suvonovich, Urokov Kamoliddin Khushvakt ugli, Bektemirov Begali Shuhrat ugli

   BobMagnetic and Electromagnetic EffectsLecture notes in networks and systems202210 iqtibos

   ABIABI:AkademIndex/2022.chapter.000014

3. Effect of Magnetized Cutting Fluids on Metal Cutting Process

   Umidjon Mardonov, Andrey Jeltukhin, Yahyojon Meliboyev +1

   BobMagnetic and Electromagnetic EffectsLecture notes in networks and systems202210 iqtibos

   ABIABI:AkademIndex/2022.chapter.000017

4. Studies Concerning Water-Based Coolants Under Magnetic Field During a Metal-Cutting Process (Turning)

   Umidjon Mardonov, Otabek Khasanov, A. A. Ismatov +1

   BobMagnetic and Electromagnetic EffectsLecture notes in networks and systems20237 iqtibos

   ABIABI:AkademIndex/2023.chapter.000025

5. Development of Liquefaction Technology 280X29NL to Increase the Strength and Brittleness of Castings

   Saidmakhamadov Nosir, Karimov Bokhodir

   BobMaterial Properties and ApplicationsLecture notes in networks and systems20227 iqtibos

   ABIABI:AkademIndex/2026.other.271068

6. Influence of Using Cutting Fluid under the Effect of Static Magnetic Field on Chip Formation in Metal Cutting with HSS Tools (turning operation)

   Umidjon Mardonov, Saidamin Khasanov, Andrey Jeltukhin +1

   MaqolaOAOchiq kirish20237 iqtibos

   ABIABI:AkademIndex/2026.other.451149

7. Effect of StaticMagneticand Pulsated Electromagnetic Fields On the Dynamic and Kinematic Viscosity of Metal Cutting Fluids

   Umidjon Mardonov, Yahyojon Meliboyev, Umida Shaozimova

   MaqolaOAOchiq kirishMagnetic and Electromagnetic EffectsInternational Journal of Integrated Engineering20236 iqtibos

   ABIABI:AkademIndex/2023.article.001214

8. DEVELOPMENT OF 280X29NL ALLOY LIQUEFACTION TECHNOLOGY TO INCREASE THE HARDNESS AND CORROSION RESISTANCE OF CAST PRODUCTS

   Turaxodjaev Nodir, Saidmakhamadov Nosir, Saidkhodjaeva Shokhista +36

   MaqolaOAOchiq kirishMetallurgy and Material FormingInternational Journal of Mechatronics and Applied Mechanics20216 iqtibos

   ABIABI:AkademIndex/2026.other.271067

9. THE EFFECT OF LITHIUM CONTENT ON THE MASS OF THE PART WHEN ALLOYED WITH LITHIUM ALUMINUM

   Turakhodjaev Nodir, Tursunbaev Sarvar, Karimov Kamaldjan +60

   MaqolaOAOchiq kirishAluminum Alloy Microstructure PropertiesInternational Journal of Mechatronics and Applied Mechanics20224 iqtibos

   ABIABI:AkademIndex/2022.article.000526

10. Intellectual Device for Measuring the Humidity of Bulk Materials

    E. Uljayev, U. M. Ubaydullayev, Sh. N. Narzullayev +1

    BobMagnetic and Electromagnetic EffectsLecture notes in networks and systems20244 iqtibos

    ABIABI:AkademIndex/2024.chapter.000047

11. THE PROPERTIES OF HIGH-SPEED STEEL Р6М5, DEPENDING ON THE COMBINED CHEMICAL HEAT TREATMENT

    Begatov Mukhammadjonovich, Sobirov Bekzodbek Ahmadjonovich, Makhmuda Yakubova +60

    MaqolaOAOchiq kirishMaterial Properties and ApplicationsInternational Journal of Mechatronics and Applied Mechanics20222 iqtibos

    ABIABI:AkademIndex/2022.article.001577

12. DEVELOPMENT OF A MATHEMATICAL MODEL FOR AUTOMATING THE SELECTION OF EFFECTIVE TECHNOLOGICAL ZONES FOR THE PLACEMENT OF PTM COMPONENTS WITH VISCOELASTIC LINKS IN DYNAMIC CONTROL

    Alisher Mamadjanov, Zayniddin Mukhiddinov, Sarvar Nabiyev +26

    MaqolaOAOchiq kirishIndustrial Engineering and TechnologiesInternational Journal of Mechatronics and Applied Mechanics20210 iqtibos

    ABIABI:AkademIndex/2021.article.010424

13. DETERMINATION OF THE STRESS-STRAIN STATE BY STAMPING EXTRUSION OF AXISYMMETRIC PARTS

    Ismailov Khasan, Abdullaev Fatkhulla, Akhmadaliev Shahkrukh +25

    MaqolaOAOchiq kirishEngineering Diagnostics and ReliabilityInternational Journal of Mechatronics and Applied Mechanics20210 iqtibos

    ABIABI:AkademIndex/2021.article.010667

14. MECHANICAL CHARACTERISTICS OF POWDERED ALUMINUM BRONZE OBTAINED FROM METALLURGICAL WASTE

    A Mukhamedov, Teshaboyev Marifovich, I Federchenko +37

    MaqolaOAOchiq kirishMetallurgy and Material ScienceInternational Journal of Mechatronics and Applied Mechanics20220 iqtibos

    ABIABI:AkademIndex/2022.article.006585

15. HARDENING HEAT TREATMENT OF WEAR-RESISTANT CARBIDE PARTS MADE BY CASTING ACCORDING TO GASIFIED MODELS

    Abdurakhmonova Kh, Karimov, A Mukhamedov +45

    MaqolaOAOchiq kirishMaterial Properties and ApplicationsInternational Journal of Mechatronics and Applied Mechanics20220 iqtibos

    ABIABI:AkademIndex/2022.article.006937

16. TECHNOLOGIES FOR EXTRACTION OF COPPER FROM COPPER SLAG BY FLOTATION

    Turakhodjaev Nodir, Sherzod Tashbulatov, Shukhrat Chorshanbiev +55

    MaqolaOAOchiq kirishMinerals Flotation and Separation TechniquesInternational Journal of Mechatronics and Applied Mechanics20220 iqtibos

    ABIABI:AkademIndex/2022.article.006938