Ushbu ishga iqtibos qilgan ishlar

28 ta ish

Ish: A theoretical method of the reception of blue stem feed by the feeders and transfer to the grinding drum

1. Transmission shaft and its parameters for feed choppers in agriculture

   Atkham Borotov, Thomas Bon, Narmurod Sattarov +4

   MaqolaOAOchiq kirishSilkworms and Sericulture ResearchBIO Web of Conferences20244 iqtibos

   ABIABI:AkademIndex/2024.article.001764

2. Results of extensive tests of a hanging brush grade equipped with track softeners and field soft devices

   A. Tukhtakuziev, A R Rasuljonov, Sh N Barlibaev +1

   MaqolaOAOchiq kirishEngineering and Agricultural InnovationsIOP Conference Series Earth and Environmental Science20233 iqtibos

   ABIABI:AkademIndex/2023.article.001713

3. Dependence of the uniformity of feed mixing in the feed mixing device of the granulation line on the number of paddle shaft revolutions and mixing time

   K D Astanakulov, Atkham Borotov, Jakhongir Tursunov +2

   MaqolaOAOchiq kirishCoal Combustion and Slurry ProcessingBIO Web of Conferences20243 iqtibos

   ABIABI:AkademIndex/2024.article.001765

4. Investigating the processes and rate of iodide ion and compound oxidation in subterranean hydrothermal waters

   Umbarov Ibragim, Khaid Turayev, Nuriddin Uralov +5

   MaqolaOAOchiq kirishCoal Combustion and Slurry ProcessingBIO Web of Conferences20243 iqtibos

   ABIABI:AkademIndex/2024.article.002939

5. Results of theoretical and experimental researches about determination the corn seed separator sieve parameters of the corn-thresher machine

   G G Fozilov, Rafiq Islam, Alisher Akhmedov +4

   MaqolaOAOchiq kirishAgricultural Engineering and MechanizationBIO Web of Conferences20242 iqtibos

   ABIABI:AkademIndex/2024.article.002067

6. Theoretical and practical aspects of the air exchange process when feeding cotton into the pipes of the carrier device

   Olimjon Sarimsakov, Feruza Kadirova

   MaqolaOAOchiq kirishMaterial Properties and ApplicationsBIO Web of Conferences20242 iqtibos

   ABIABI:AkademIndex/2024.article.002070

7. The current state of soybean production and its size-mass indicators in the conditions of Uzbekistan

   Abdigappar Umirov, Mukaddas Kodirova, Bogdagul Karshieva +4

   MaqolaOAOchiq kirishAgricultural Development and PoliciesBIO Web of Conferences20242 iqtibos

   ABIABI:AkademIndex/2024.article.002941

8. Analysis of the state of cultivation and harvesting of mung bean and agro-biological requirements for threshing and separating its grain

   Abdimalik Kurbanov, M Kh Shomirzaev, Shokir Tursunov +6

   MaqolaOAOchiq kirishAgriculture and Biological StudiesBIO Web of Conferences20242 iqtibos

   ABIABI:AkademIndex/2024.article.003212

9. Theoretical aspects of substantiating the parameters of the working body of an environmentally comfortable spraying unit

   Kh D Irisov, I R Bekmurodov

   MaqolaOAOchiq kirishMechanical Systems and EngineeringIOP Conference Series Earth and Environmental Science20231 iqtibos

   ABIABI:AkademIndex/2023.article.001948

10. Determining the depth of immersion of combined machine ridge harvesters and the dimensions of the ridges produced by them

    Abdusalim Tukhtakuziev, Sherzod Barlibaev, Abdurakhmon Rasuljonov +1

    MaqolaOAOchiq kirishDiverse Industrial Engineering TechnologiesBIO Web of Conferences20241 iqtibos

    ABIABI:AkademIndex/2024.article.002299

11. Results of experimental studies to justify the parameters of the working engines of the machine separator

    Baxtiyor Tulaganov, Yunus Rakhimov, Abbos Bozorboev +3

    MaqolaOAOchiq kirishEngineering Diagnostics and ReliabilityBIO Web of Conferences20241 iqtibos

    ABIABI:AkademIndex/2024.article.002301

12. Results of acceptance tests of the disk plow for tillage in agriculture

    Shukhrat Ishmuradov, Rustamjon Abdumajidov

    MaqolaOAOchiq kirishMechanical and Thermal Properties AnalysisBIO Web of Conferences20241 iqtibos

    ABIABI:AkademIndex/2024.article.004175

13. Drum dispenser of feed additives

    Eshpulat Eshdavlatov, F M Mamatov, A E Eshdalatov +2

    MaqolaOAOchiq kirishMechanical Systems and EngineeringIOP Conference Series Earth and Environmental Science20230 iqtibos

    ABIABI:AkademIndex/2023.article.012251

14. Development of the constructive scheme and 3D model of the smart corn-seed grader machine

    G G Fozilov, B.Zh. Koptileuov, A T Umirov +4

    MaqolaOAOchiq kirishAgriculture and Biological StudiesIOP Conference Series Earth and Environmental Science20230 iqtibos

    ABIABI:AkademIndex/2023.article.012269

15. Raising calves using cold methods at an early age

    Narmurod Sattarov, Kadirjon Shavazov, Rustem Yunusov +4

    MaqolaOAOchiq kirishAnimal health and immunologyBIO Web of Conferences20240 iqtibos

    ABIABI:AkademIndex/2024.article.002842

16. Substantiation of the parameters of the double flat disc seeder for directly sowing repeated crops in the soil after wheat crop harvesting in Uzbekistan

    Abdusalim Tukhtakuziev, Abdurakhmon Rasuljonov, Shuhrat Azizov +1

    MaqolaOAOchiq kirishEngineering and Agricultural InnovationsBIO Web of Conferences20240 iqtibos

    ABIABI:AkademIndex/2024.article.003210

17. Study of the influence of ultrasound on the wear resistance of coatings made of composite polymer materials for the shape of architectural and artistic reinforced concrete products

    Muzaffar B. Mukhitdinov, Farrukh A. Dadakhanov, Zhasur D. Nuritdinov

    MaqolaOAOchiq kirishMaterial Properties and ApplicationsBIO Web of Conferences20240 iqtibos

    ABIABI:AkademIndex/2024.article.005851

18. Poultry analysis and research on the preparation of crushed blue grass feed for poultry

    K D Astanakulov, Hossein Navid, Azizbek Khatamov +4

    MaqolaOAOchiq kirishAgricultural Systems and PracticesBIO Web of Conferences20240 iqtibos

    ABIABI:AkademIndex/2024.article.005858

19. Temperature deformation calculation of reinforced concrete parts in hot and dry climates

    Bakhodir Rizayev, Umarov Isroil, Nuriddinov Jasurbek

    MaqolaOAOchiq kirishFire effects on concrete materialsBIO Web of Conferences20240 iqtibos

    ABIABI:AkademIndex/2024.article.005864

20. Theoretical research of the parameters of the biters that distribute feed to the grinding rotor

    Shokir G‘apparov, Shavkat Turaev, Erkin Eshkuvatov +4

    MaqolaOAOchiq kirishIndustrial Engineering and TechnologiesBIO Web of Conferences20240 iqtibos

    ABIABI:AkademIndex/2024.article.005865

21. Dry mass accumulation of cotton under drip and furrow irrigation in Uzbekistan

    Mirzoolim Avliyakulov, Nurmamat Rajabov, Gulnoza Murtazayeva +5

    MaqolaOAOchiq kirishEngineering and Agricultural InnovationsBIO Web of Conferences20240 iqtibos

    ABIABI:AkademIndex/2024.article.005868

22. Development of combined aggregate for improvement of meliorative condition of saline gypsum soils

    Masharip Khajiev, M M Atadjanova, Jakhongir Dusiyoro

    MaqolaOAOchiq kirishGeotechnical and Geomechanical EngineeringBIO Web of Conferences20240 iqtibos

    ABIABI:AkademIndex/2024.article.005869

23. Drip irrigation and new fertilizer application technology for cotton variety C-8286 in the condition of global climate change

    Mirzoolim Avliyakulov, Nurmamat Rajabov, Gulnoza Murtazayeva +3

    MaqolaOAOchiq kirishResearch in Cotton CultivationBIO Web of Conferences20240 iqtibos

    ABIABI:AkademIndex/2024.article.005873

24. The method of dispersion analysis of droplets using mini droplet cards for resource-saving agricultural technologies

    Kh D Irisov, Irina Gorlova, Ibrokhim Khudaev

    MaqolaOAOchiq kirishPlant Surface Properties and TreatmentsBIO Web of Conferences20240 iqtibos

    ABIABI:AkademIndex/2024.article.005875

25. Development of fisheries in Uzbekistan and activities to conserve biodiversity and improve its feed base: Review

    Azizbek Khatamov

    MaqolaOAOchiq kirishEngineering and Agricultural InnovationsBIO Web of Conferences20240 iqtibos

    ABIABI:AkademIndex/2024.article.005877