Asosiy kontentga oʻtish
AkademIndex

Xizmatlar

← Ishga qaytish

Ushbu ish iqtibos qilgan ishlar

85 ta ish

Ish: Metrological Comparison of Available Methods to Correct Edge-Effect Local Plasticity in Instrumented Indentation Test

  1. Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology

    W. C. Oliver, George M. Pharr

    Maqola20046 iqtibos
    ABI

  2. Single-step calibration method for nano indentation testing machines

    Maurizio Galetto, Gianfranco Genta, Giacomo Maculotti

    Maqola20204 iqtibos
    ABI

  3. Germanium: A review of its US demand, uses, resources, chemistry, and separation technologies

    Madhav Patel, Athanasios K. Karamalidis

    Sharh maqola20214 iqtibos
    ABI

  4. Effects of 'sinking in' and 'piling up' on estimating the contact area under load in indentation

    Yang‐Tse Cheng, Che-Min Cheng

    Maqola19983 iqtibos
    ABI

  5. Nanoindentation: Measuring methods and applications

    D.A. Lucca, Konrad Herrmann, M.J. Klopfstein

    Maqola20103 iqtibos
    ABI

  6. Indentation size effects in crystalline materials: A law for strain gradient plasticity

    William D. Nix, Huajian Gao

    Maqola19983 iqtibos
    ABI

  7. A comparison of nanoindentation pile-up in bulk materials and thin films

    Noushin Moharrami, S.J. Bull

    Maqola20143 iqtibos
    ABI

  8. Uncertainty evaluation of indentation modulus in the nano-range: Contact stiffness contribution

    Giulio Barbato, Gianfranco Genta, Roberto Cagliero +4

    Maqola20173 iqtibos
    ABI

  9. Instrumented Indentation Test in the Nano-range: Performances Comparison of Testing Machines Calibration Methods

    Maurizio Galetto, Giacomo Maculotti, Gianfranco Genta +2

    Maqola20193 iqtibos
    ABI

  10. High-Precision Calibration of Indenter Area Function and Instrument Compliance

    T. Chudoba, Dieter Schwenk, Philipp Reinstädt +1

    Maqola20223 iqtibos
    ABI

  11. Calibration of machine platform nonlinearity in Instrumented Indentation Test in the macro range

    Jasurkhuja Kholkhujaev, Giacomo Maculotti, Gianfranco Genta +1

    MaqolaOchiq kirishMetal and Thin Film MechanicsPrecision Engineering20233 iqtibos
    ABI

  12. Electrode materials for lithium-ion batteries

    Amit Kumar Mishra, Akansha Mehta, Soumen Basu +5

    MaqolaOchiq kirish20182 iqtibos
    ABI

  13. Uncertainty-based comparison of conventional and surface topography-based methods for wear volume evaluation in pin-on-disc tribological test

    Giacomo Maculotti, Edoardo Goti, Gianfranco Genta +2

    Maqola20212 iqtibos
    ABI

  14. Mapping of mechanical properties of WC–Co using nanoindentation

    Håkan Engqvist, Urban Wiklund

    Maqola20002 iqtibos
    ABI

  15. Indentation of self-similar indenters: An FEM-assisted energy-based analysis

    Fabian Pöhl, S. Huth, W. Theisen

    Maqola20142 iqtibos
    ABI

  16. Electrical resistance of metallic contacts on silicon and germanium during indentation

    George M. Pharr, W. C. Oliver, Robert F. Cook +4

    Maqola19922 iqtibos
    ABI

  17. Exploiting interactions between structure size and indentation size effects to determine the characteristic dimension of nano-structured materials by indentation

    Xiaodong Hou, N.M. Jennett, Magdalena Parlińska‐Wojtan

    Maqola20132 iqtibos
    ABI

  18. Investigations of new possibilities in the calibration of diamond hardness indenters geometry

    Alessandro Germak, Claudio Origlia

    Maqola20102 iqtibos
    ABI

  19. The Indentation Size Effect: A Critical Examination of Experimental Observations and Mechanistic Interpretations

    George M. Pharr, Erik G. Herbert, Yanfei Gao

    Maqola20102 iqtibos
    ABI

  20. Correction of the hardness measurement for pile-up materials with a nano indentation machine

    Moon Shik Park

    Maqola20162 iqtibos
    ABI

  21. Instrumented Indentation Test: Contact Stiffness Evaluation in the Nano-range

    Giacomo Maculotti, Gianfranco Genta, Massimo Lorusso +3

    Maqola20182 iqtibos
    ABI

  22. Assessment of Heat Treatment Effect on AlSi10Mg by Selective Laser Melting through Indentation Testing

    Giacomo Maculotti, Gianfranco Genta, Massimo Lorusso +1

    Maqola20192 iqtibos
    ABI

  23. Metrological characteristics for the calibration of surface topography measuring instruments: a review

    Richard Leach, Han Haitjema, Rong Su +1

    Sharh maqola20202 iqtibos
    ABI

  24. Sarlavhasiz

    Boshqa2 iqtibos
    ABI

  25. Sarlavhasiz

    Boshqa1 iqtibos
    ABI