Temperature distribution in a panel-radiant heating system
J.J. KamolovDepartment of Heliophysics , Renewable Energy Sources and Electronics , Bukhara State University , 200117 , M. Ikbol st. , Bukhara , UzbekistanK. A. SamievDepartment of Physics , Bukhara State University , 200117 , M. Ikbol st. , Bukhara , Uzbekistan
2025en
Ochiq kirishGibrid
Litsenziya: cc-by
ABI
Annotatsiya
In this study, a computer model was developed in Comsol Multiphysics to determine and evaluate the temperature distribution in a panel-radiant heating system with a heated floor. A panel-radiant heating system consisting of a concrete layer with dimensions of 4 × 3.3 × 0.1 m³ was selected, and copper pipes with an inner diameter of 2 cm and total lengths of 64.84 m and 64.24 m were installed within this volume. Water was used as the heat carrier. The calculations revealed that in the second configuration, the temperature distribution on the surface of the panel-radiant heated floor system is relatively uniform and does not exceed the required value.
Hali tarjima qilinmagan
Identifikatorlar
Iqtiboslar va manbalar
0 ta iqtibos0 ta foydalanilgan manba