Modern strengthening techniques for enhancing the load-carrying capacity of in-service road bridges in Uzbekistan

The sustained growth of traffic intensity and axle loads in Uzbekistan has accelerated the deterioration of in-service road bridges, making cost-effective strengthening a national priority. This paper presents a structured review and comparative assessment of strengthening approaches grouped into: (i) traditional cross-section enlargement and substructure rehabilitation, (ii) structural scheme optimization and dead-load reduction (including external prestressing and span continuity), and (iii) advanced solutions based on carbon-fiber-reinforced polymers (CFRP). A worked example for a typical reinforced-concrete girder span demonstrates the compensation of a deficient bending moment of Δ M = 70 kN·m and indicates an ~18-25 % increase in load-carrying capacity after strengthening. The paper further synthesizes implementation considerations for arid-continental climates, including surface preparation, adhesion control, protective coatings, and staged load testing. Drawing on regional practice, CFRP systems are highlighted as offering high strength-to-weight benefits, installation speed, and minimal traffic disruption; reported gains for flexural elements typically range from 25 % to 45 %, subject to detailing and quality assurance. The results support integrating CFRP-based measures and complementary dead-load optimization into bridge rehabilitation programs in Uzbekistan, with recommendations for monitoring intervals (6-12 months) and future durability studies on adhesives and UV/moisture protection. Overall, the study consolidates methods and provides quantitatively grounded guidance for extending service life under contemporary traffic demands.

Hali tarjima qilinmagan