Coagulation Treatment of Foundry and Thermal Power Plant Wastewater in the Navoi Region Using an Iron(Iii) Chloride Coagulant from Local Raw Material
Litsenziya: cc-by
Annotatsiya
Machine-building and power-generation enterprises in the Navoi region discharge wastewater that exceeds permissible concentrations for suspended solids, mineral salts and trace metals while relying mainly on mechanical settling ponds. This work evaluated a liquid iron(III) chloride coagulant (32.81 % FeCl₃) obtained from a local iron-bearing ore for four wastewater streams: the foundry shop of the Navoi Machine-Building Plant (NMZ) and three streams of Navoi Thermal Power Plant JSC (TPP). In the foundry wastewater, coagulation reduced solids from 10,557.8 to 1,372.5 mg/dm³ (87.0 %), Mn from 8.53 to 1.33 mg/dm³ (84.4 %) and Cu from 0.066 to 0.010 mg/dm³ (84.8 %), whereas Ni decreased by only 31.7 % and dissolved iron increased from 8.3 to 10.5 mg/dm³, indicating an excessive dose for this stream. In the TPP stream entering mechanical treatment, all parameters exceeded the maximum permissible concentrations (MPC) by 1.26–1.53 times; after coagulation, non-settleable solids fell from 460 to 278 mg/L, chloride from 1,360 to 960 mg/L and sulfate from 630 to 465 mg/L, and all parameters except BOD₅ (32 vs 30 mg/L) met the MPC. In the production-shop and 450 MW-unit streams, sulfate decreased from 4,383 to 3,132 and from 4,112.4 to 3,234 mg/L, bringing all exceeding parameters below the MPC. For the TPP annual discharge of 2,182 thousand m³, the treatment would keep about 397 t of suspended solids, 873 t of chloride and 360 t of sulfate out of the receiving water per year. A coagulation stage added to the existing three-pond mechanical treatment is proposed.
Hali tarjima qilinmagan