Asosiy kontentga oʻtish
Maqola

Effect of multi-stage heat treatment regime parameters on the structure and mechanical properties of modified 35HML chromium-molybdenum steel

Muzaffar UbaydullaevAlmalyk Branch of NUST MISISElena RuklinskayaAlmalyk Branch of NUST MISISUmida ZiyamukhamedovaTashkent State Transport UniversityNusratilla YodgorovAlmalyk Branch of NUST MISISNikhola KhavasovaAlmalyk Branch of NUST MISIS
2026
ABI

Annotatsiya

This paper presents the results of a comprehensive experimental study of the effect of multi-stage heat treatment regime parameters on the structure and mechanical properties of modified cast chromium-molybdenum steel 35HМЛ, used in the manufacture of cast parts for mining excavators at JSC “Almalyk Mining and Metallurgical Combine”. The melt was modified with a complex Fe-V-Al-Ca ferroalloy composition (V 25–30 %, Al 15–20 %, Ca 5–10 %, balance Fe) in an amount of 0.15–0.18 wt. %, introduced into the ladle onto the metal stream at a temperature not below 1520 °C. A four-stage heat treatment scheme was developed: homogenizing annealing at 880 °C → normalization at 880 °C → quenching from 850 °C in preheated water at 60 °C → high tempering at 600–650 °C. The choice of preheated water at 60 °C as the quenching medium is experimentally justified by comparison with industrial oil И-20А: both media provide practically identical hardness (62 HRC versus 61.5 HRC), while preheated water reduces the proportion of castings rejected due to cracks from 12 % to 2 %. The dependence of hardness on tempering temperature in the range of 450–650 °C was established, and the recommended range of 600–650 °C was justified, excluding the zone of type II temper embrittlement (450–550 °C). The developed technology was implemented at the Central Repair and Mechanical Plant (CRMZ) of JSC “AMMC” (Implementation Certificate No. SL-355/1 dated April 16, 2025), providing a 35 % increase in Charpy impact toughness (from 540 ± 22 to 730 ± 31 kJ/m²) and an increase in the service life of ЭКГ-10 excavator support wheels from 2800 to 4200 hours.

Hali tarjima qilinmagan

Identifikatorlar

Iqtiboslar va manbalar

0 ta iqtibos0 ta foydalanilgan manba