Asosiy kontentga oʻtish
Maqola

Testing of a gear pump and simulation of the state of support bushings with expanding elements under load

Balgali MyrzakhmetKazakh Agrotechnical Research University, Technical Faculty, Department of Technological Machines and Equipment, Astana, KazakhstanКарибек ШеровKazakh Agrotechnical Research University, Technical Faculty, Department of Technological Machines and Equipment, Astana, KazakhstanJ.B. ToshovTashkent State Technical University, Faculty of Geological Exploration and Mining & Metallurgy, Department of Mining Engineering, Tashkent, UzbekistanSabit MagavinKazakh Agrotechnical Research University, Technical Faculty, Department of Technological Machines and Equipment, Astana, KazakhstanValery KhanKazakh Agrotechnical Research University, Technical Faculty, Department of Technological Machines and Equipment, Astana, KazakhstanAubek SherovKazakh Agrotechnical Research University, Technical Faculty, Department of Technological Machines and Equipment, Astana, KazakhstanYernat ImanbayevAgrotechnical Research University, LLP "Electric Locomotive Assembly Plant", Astana, KazakhstanBauyrzhan ZhumagaliyevKazakh Agrotechnical Research University, Technical Faculty, Department of Technological Machines and Equipment, Astana, KazakhstanNursulu TuliyevaKazakh Agrotechnical Research University, Technical Faculty, Department of Technological Machines and Equipment, Astana, Kazakhstan
2026en
ABI

Annotatsiya

This paper presents the results of testing a gear pump and simulating the state of support bushings with expanding elements under load. The results of the gear pump tests showed that an increase in rotational speed has a positive effect on pump capacity, operating pressure in the system, and oil heating temperature. It was also established that, on average, the operating pressure generated by a gear pump with a biaxial connection is 1.2 times higher than that of the standard Gear pump-50U3. The results of simulation of the state of support bushings with expanding elements under load demonstrated that an increase in pressure up to 15 bar (at 1500 rpm) acting on the plate interacting with the bushing leads to a significant increase in the reaction force and loads on the joint. It was established that the elastic expanding element retains its geometric profile and mechanical properties under deformation. Overall, the results of experimental testing and computer simulation confirmed the operability of the design of a gear pump with a biaxial connection and expanding elements.

Hali tarjima qilinmagan

Identifikatorlar

Iqtiboslar va manbalar