MATHEMATICAL MODELING OF DEMULSIFIER CONCENTRATION EFFECTS ON OIL–WATER INTERFACIAL TENSION DURING FIELD OIL TREATMENT
Ochiq kirish: yoʻq
Annotatsiya
Stable water-in-oil emulsions increase the hydraulic, separation, and chemical-treatment burden of field oil treatment systems. This study develops a statistically evaluated, physically bounded correlation between demulsifier concentration and oil–water interfacial tension (IFT), while explicitly separating that correlation from unvalidated claims about droplet diameter, coalescence rate, or equipment optimization. Fourteen secondary concentration–IFT data pairs (0–210 g/t) attributed to published field-oriented measurements were analyzed using a three-parameter asymptotic exponential model, σ(C) = σ∞ + (σ₀ − σ∞)exp(−kC). Nonlinear least-squares estimation gave σ₀ = 45.81 mN/m, σ∞ = 13.18 mN/m, and k = 0.01737 (g/t)⁻¹. Model performance was R² = 0.973, RMSE = 1.59 mN/m, and MAE = 1.40 mN/m. A normalized response function shows that 80%, 90%, and 95% of the modeled attainable IFT reduction are reached at approximately 92.7, 132.6, and 172.5 g/t, respectively. Thus, 100–130 g/t corresponds to about 82.4–89.5% of the modeled IFT response and can be treated as a practical screening band for diminishing returns under the analyzed conditions, not as a universal techno-economic optimum. The model is suitable as a concentration-dependent IFT submodel within broader population-balance, coalescence, settling, or electrostatic-dehydration simulations, provided those models independently represent droplet-size evolution and process hydrodynamics. The work also identifies the validation data required before the correlation can be used for field optimization.
Hali tarjima qilinmagan