Asosiy kontentga oʻtish
Maqola

Valorisation of Secondary Petrochemical Feedstocks into a Multicomponent Demulsifier: Sodium Xylenesulfonate from Pyrolysis-Derived Xylene Formulated with Alkaline-Earth Stearates and Waste Motor Oil

Bobir OlimovDepartment of Chemical Technology, Faculty of Technology, Bukhara State Technical University, 15 Qayum Murtazaev Street, Bukhara 200100, UzbekistanBahrom RamazanovDepartment of Chemical Technology, Faculty of Technology, Bukhara State Technical University, 15 Qayum Murtazaev Street, Bukhara 200100, UzbekistanVokhid AkhmedovDepartment of Chemical Technology, Faculty of Technology, Bukhara State Technical University, 15 Qayum Murtazaev Street, Bukhara 200100, UzbekistanFatilloyev Shamshod Fayzullo oʻgʻliDepartment of Chemical Technology, Faculty of Technology, Bukhara State Technical University, 15 Qayum Murtazaev Street, Bukhara 200100, UzbekistanDoston MurodovDepartment of Chemical Technology, Faculty of Technology, Bukhara State Technical University, 15 Qayum Murtazaev Street, Bukhara 200100, UzbekistanKhurshid O̒rinovDepartment of Chemical Technology, Faculty of Technology, Bukhara State Technical University, 15 Qayum Murtazaev Street, Bukhara 200100, Uzbekistan
2026en
Ochiq kirishOltin

Litsenziya: cc-by

ABI

Annotatsiya

Stable water-in-crude-oil emulsions remain a bottleneck in the treatment of heavy Uzbek crudes, and the demulsifiers used at field level are almost entirely imported. Two local secondary streams—the xylene-rich Ustyurt pyrolysis distillate and collected waste motor oil—were converted into a multicomponent demulsifier. Xylene was sulfonated with 98 wt.% H2SO4 and neutralised to sodium xylenesulfonate (SXS), reaching 96.8% isolated yield at 110–120 °C and an acid:xylene molar ratio of 1.34:1. Fixed-time yields gave a linear Arrhenius dependence (R2 = 0.998) with an apparent activation energy of 21.7 kJ mol−1, ΔH‡ = 18.4 kJ mol−1 and ΔS‡ = −262 J mol−1 K−1, indicating a transport-influenced electrophilic substitution. FTIR confirmed the –SO3Na group, and TG/DTA showed only 5.9% mass loss below 415 °C. Of four hydrophilic–lipophilic balance estimates, only the Davies value (14.2) is compatible with the observed water solubility. The optimum formulation KS-6 (30 wt.% SXS, 50 wt.% waste oil, 18 wt.% Ca and 2 wt.% Sr stearate) gave water-separation efficiencies of 81.0, 93.7 and 98.9% at water cuts of 60, 70 and 80 vol.%, exceeding the imported reference ND-12 by factors of 1.18–1.26, and lowered the residual salt content to 125 mg dm−3.

Hali tarjima qilinmagan

Identifikatorlar

Iqtiboslar va manbalar