Asosiy kontentga oʻtish
Maqola

MURAKKAB (HALQASIMON) NAPORLI QUVUR TARMOQLARIDA ISHQALANISH KUCHINI HISOBGA OLGAN HOLDA GIDRAVLIK ZARBANI HISOBLASH

Sobir EshevKarshi State Technical UniversityUlugmurad Umbarovich JonqobilovKarshi State Technical UniversitySobir Ulug‘murodovich JonqobilovKarshi State Technical UniversityUlug‘bek Mamashoyevich RajabovKarshi State Technical UniversityBektemir Ulug‘muradovich JonqobilovKarshi State Technical UniversityZoir Husniddinovich RuzimurodovKarshi State Technical UniversityShohruh Baxodiro‘g‘li BahodirovKarshi State Technical University
2026en
ABI

Annotatsiya

The article presents an extended step-by-step method for calculating water hammer in complex (looped) pressure pipeline networks, taking into account the propagation of pressure waves through branching junctions and the effect of friction forces. The junction equation is formulated based on the pressure impulses and in the pipelines entering and leaving the junction, the condition of a common pressure head at the junction, and the algebraic balance of flow rates. Experimental results obtained from a two-loop polyethylene pipeline network with mm, m/s, and m were analyzed. Comparison of the calculated values with 10 experimental results at each of sections A and B showed mean relative errors of 4.48 and 4.25 %, respectively. Using the case of a sudden pump shutdown, it was established that the check valve closes at , while at an excess pressure of 91% relative to the static pressure occurs.

Hali tarjima qilinmagan

Identifikatorlar

Iqtiboslar va manbalar