Asosiy kontentga oʻtish
Maqola

INFLUENCE OF METAL-OXIDE CATALYTIC SYSTEMS ON THE PROCESS OF OBTAINING VINYL COMPOUNDS OF TETRASENE ISOLATED FROM PYROLYSIS RESIN

B. BegmatovTashkent Institute of Chemical Technology, Tashkent Scientific Research Institute of Chemical Technology,K.X. ZiyadullayevaS.E. NurmanovNational University of Uzbekistan
2026en
ABI

Annotatsiya

In this work, the process of obtaining mono- and divinyl compounds was studied through the step-by-step bromination of tetracen isolated from pyrolysis resin followed by catalytic vinylation. The resulting intermediate products were vinylated in the presence of vinyl boric acid after the bromination of tetracen with N-bromo succinimide. The influence of temperature, reaction time, solvent, base content, and metal-oxide catalytic systems on the process was evaluated. In the Pd-Co3O4/K2CO3 system, increasing the temperature from 40 to 70 °C and the reaction time from 2 to 8 hours increased the product yield from 37.7 to 83.8 %. At 70 °C and 8 hours, conversion was 96.0 %, selectivity was 95.9 %, and yield was 83.8 %. Among the solvents, 2-MeTHF yielded the best results, reaching 98 % in 48 hours. When comparing the metal-oxide systems at 80 °C and 6 hours, Pd-Co3O4 showed the highest activity, ensuring 100 % conversion, 100 % selectivity, and a 90 % GC yield. The results showed the importance of selecting the appropriate catalyst composition, solvent, base, temperature, and reaction time when producing mono- and divinyl compounds of tetracen.

Hali tarjima qilinmagan

Identifikatorlar

Iqtiboslar va manbalar