Structural-Parametric Model of the Abrasive Wear of Carbon Steels and Its Inverse Application for Selecting the Steel Grade and Hardening Mode
Litsenziya: cc-by
Annotatsiya
A semi-empirical additive model is proposed that relates the linear abrasive wear of carbon steels to measurable structural parameters: the dislocation density, the carbon content of martensite or ferrite, the amount of retained austenite, the amount of secondary cementite and the inter-carbide spacing. Each term of the model was identified in a separate experimental series on an X4-B machine in which the other parameters were fixed. Two forms of the model are used: for hardened and low-tempered steels with respect to the reference state of steel 30 (L = 0.53 mm), and for high-tempered steels with a ferrite–carbide structure with respect to annealed Armco iron (L = 0.88 mm), where the carbide subsystem is described by the inter-carbide spacing instead of the cementite fraction. Verification on steels U12 and U13 quenched from 760–840 °C gave a mean absolute error of 0.016 mm, a root-mean-square error of 0.021 mm and a mean relative error of 4.4 %; for high-tempered strips of U12 and U13 the calculated wear (0.655 and 0.507 mm) agreed with the measured values (0.660 and 0.49 mm). The model was inverted to determine the dislocation density required for a given wear, and experimental relations between √ρ, the inter-carbide spacing and the carbon content were used as constraints of technological feasibility. For steel U12 with a required wear of 0.36 mm the inverse calculation gives √ρ = 5.365·105 cm−1, practically equal to the measured 5.36·105 cm−1 after quenching from 800 °C. A six-step algorithm for selecting the steel grade and hardening mode is proposed.
Hali tarjima qilinmagan