O‘ZGARUVCHAN SHAMOL OQIMI SHAROITIDA VERTIKAL O‘QLI SHAMOL TURBINASINING AERODINAMIK SAMARADORLIGINI SONLI BAHOLASH
Litsenziya: cc-by
Annotatsiya
In the modern world, the use of green technologies, particularly hybrid vertical-axis wind energy systems, occupies one of the leading positions in saving energy resources, stabilizing environmental issues, and increasing the reliability and continuity of power supply. Enhancing the efficiency of vertical-axis wind energy systems under low wind speeds is of great importance. Based on analysis, it has been determined that using the CFD model in the Ansys Fluent system provides good results in designing the optimal dimensions of wind turbine blades. The hybrid Savonius–Darrieus wind turbine was designed in a two-dimensional (2D) model in Ansys Fluent, simulated, and its performance under variable wind flow conditions was evaluated. The efficiency coefficient indicators of the hybrid Savonius–Darrieus wind turbine under variable wind flow conditions are presented. It was found that when the blade tip speed ratio is 2,5, the maximum power coefficient reaches 0.4. It has been identified that the efficiency and reliability of vertical-axis wind energy systems under variable wind flow conditions depend on the shape, material, and aerodynamics of the turbine blades. The analysis showed that using the CFD model in the Ansys Fluent system for designing optimal blade dimensions gives good results. The hybrid Savonius–Darrieus wind turbine was designed, simulated, and evaluated in a two-dimensional setup in Ansys Fluent under variable wind speeds. The aerodynamic profile DU-06-W-200 was used for modeling with the following boundary conditions and input parameters: airflow velocity 10 m/s, operating temperature 23 °C, operating pressure 1·10⁵ Pa, air density 1.23 kg/m³, aerodynamic chord length 0.2 m, air dynamic viscosity 1.7894·10⁻⁵ kg/m·s. The turbulence models SST k-ω and k-ε were applied, and the Reynolds number was 1.4·10⁶. When the blade tip speed ratio was equal to 2,5, the wind energy utilization coefficient reached 0.4.
Hali tarjima qilinmagan