Asosiy kontentga oʻtish
Maqola

Surface Charge Inversion for Wind Turbine Blade Coatings with Uncertain Erosion Geometry

Shiwei DuSchool of Electrical Engineering, Shandong University, Jinan 250061, ChinaLi ZhangSchool of Electrical Engineering, Shandong University, Jinan 250061, ChinaGuan WangSchool of Electrical Engineering, Shandong University, Jinan 250061, ChinaIkromjon Rakhmonov UsmonovichPower Engineering Faculty, Tashkent State Technical University, Tashkent 100095, UzbekistanNurbek N. KurbonovPower Engineering Faculty, Tashkent State Technical University, Tashkent 100095, UzbekistanTeng YueZouxian Plant, Huadian Power International Corporation Limited, Zoucheng 273522, China
2026en
Ochiq kirishOltin

Litsenziya: cc-by

ABI

Annotatsiya

Rain erosion changes the surface profile and dielectric interfaces of wind turbine blade protection coatings, introducing geometry-dependent bias into surface charge reconstruction. A constrained inversion method combines a finite library of erosion profiles with continuous radial charge parameterization in a three-dimensional laminate model. Candidate-specific responses and variable projection jointly estimate geometry and charge, while the square specimen’s D4 symmetry reduces the computational domain to one eighth. Continuous-source finite-element potentials provide the numerical observations. With matched generating and inverse discretizations, median global errors over 24 inputs are 0.172% and 1.039% at single-reading noise standard deviations of 0.003 and 0.1 V, respectively. At 0.003 V, 21 inputs have global errors at or below 20%; three broad-charge realizations reach 65.69–70.01%. Across six out-of-library cases, candidate selection reduces the median pit-interior error from 10.264% to 4.821%, while the median pit-edge error increases. Joint ±10% permittivity shifts give global errors of 9.660% and 8.027% in one representative case. Representative finite-aperture simulations and controlled mesh refinement further reveal the sensitivity of fine-scale recovery. The method relates the estimated charge distribution to erosion geometry, providing a numerical approach to local electrical characterization of damaged coatings.

Hali tarjima qilinmagan

Identifikatorlar

Iqtiboslar va manbalar