Asosiy kontentga oʻtish
Maqola

Mechanical and Thermal Activation of Navbahor Bentonite and Sapropel And the Use of Their Composites for Lead Immobilization in Contaminated Soil

2026en
ABI

Annotatsiya

Bentonite from the Navbahor deposit (Uzbekistan) and sapropel were activated mechanically in a planetary ball mill (24 full factorial design: 200/500 rpm, 30/90 min, ball-to-powder ratio 10:1/30:1, dry/wet) and thermally in a muffle furnace (bentonite 200–500 °C, sapropel 100–250 °C, 30–75 min), and the activated materials were combined into composites for Pb immobilization in soil spiked with 1500 mg/kg Pb. Milling raised the specific surface area (SBET) of bentonite from 50.13 to 70.97–102.31 m2/g and that of sapropel from 15.04 to 20.28–44.10 m2/g; wet milling gave a higher SBET than dry milling in every pair. Heating raised SBET of bentonite to 89.72 m2/g with little gain above 400 °C at 60–75 min, and that of sapropel to 40.10 m2/g at 250 °C, while its mean pore diameter fell from 19.05 to 11.53 nm. In the soil, citric acid- and Trilon B-extractable Pb decreased with a higher bentonite share (1:4 to 4:1), a higher dose (10–50 g/kg) and longer incubation (1–30 days). The composite of thermally activated bentonite (400 °C, 60 min) with milled sapropel at 4:1 and 50 g/kg left 22.48 % (citric acid) and 27.12 % (Trilon B) of the total Pb extractable after 30 days, against 24.14 % and 28.55 % for commercial humic acid at the same dose. On day 1 the composites were less effective than the commercial humic sorbents.

Hali tarjima qilinmagan

Identifikatorlar

Iqtiboslar va manbalar