DEVELOPMENT OF A TECHNOLOGY FOR REPROCESSING SPENT ZEOLITES USED IN GAS DEHYDRATION: A REVIEW AND TECHNOLOGICAL ASSESSMENT
Litsenziya: cc-by
Annotatsiya
Zeolite molecular sieves are widely used for deep dehydration of natural gas because of their high affinity for water, well-defined micropore structure and ability to achieve very low outlet water concentrations.During long-term cyclic operation, however, the adsorbent gradually loses performance as a result of hydrothermal aging, carbonaceous deposits, adsorption of methanol and heavier hydrocarbons, pore blockage, binder deterioration and mechanical attrition.Complete replacement of the molecular sieve bed produces a significant solid-waste stream even though a substantial part of the spent material may retain crystalline structure and recoverable adsorption capacity.This review and technological assessment summarizes recent data on the deactivation and regeneration of 3A, 4A, 5A and 13X molecular sieves used in gas dehydration and proposes an integrated reprocessing route.The proposed route includes feed identification and segregation, removal of fines, analytical diagnosis, low-temperature drying, thermal desorption, controlled oxidative removal of carbonaceous residues when justified, cooling under dry gas, grading, water-adsorption testing and mechanical quality control.Depending on the recovered performance, regenerated material may be returned to dehydration service, redirected to less demanding adsorption duties, or converted into an aluminosilicate secondary raw material.The article is literaturebased and does not report original plant trials; therefore, the temperature windows and acceptance criteria are presented as screening ranges that must be validated for the exact commercial zeolite, binder and contamination profile.
Hali tarjima qilinmagan