Asosiy kontentga oʻtish
Maqola

Design Parameters of Disc Levellers for the Track Loosener of a Two Pass Mounted Harrow

Abdusalim TukhtakuziyevOtaboyev o‘g‘liThe Department of Agricultural Product Processing Technologies, Gulistan State University, Gulistan, UzbekistanErmatov AbdivaitovichThe Department of Agricultural Product Processing Technologies, Gulistan State University, Gulistan, Uzbekistan
2026en
Ochiq kirishGibrid

Litsenziya: cc-by

ABI

Annotatsiya

The article examines the improvement of the working process of a two-track mounted harrowing unit designed to improve the quality of surface soil tillage and reduce operational costs. The main shortcomings of two-track tooth harrows used under the conditions of the Republic of Uzbekistan are analyzed, including the need to periodically stop the unit for manual removal of weeds and plant residues from the working bodies, increased labor requirements, difficulties in transportation from one field to another, low maneuverability, and large overall dimensions. To eliminate these shortcomings, a two-track mounted harrowing unit has been developed, consisting of a frame, a three-point hitch, tooth harrows connected to the frame by chain links, support skids, and track loosening devices. The track loosener includes a loosening tine and disk levellers mounted on the frame by means of a parallelogram mechanism. Based on the laws and principles of agricultural mechanics, theoretical studies were conducted on the interaction of the disk levellers with the soil, and their main structural and technological parameters were substantiated. It was established that, to ensure the required levelling of the soil surface, the diameter of the disk levellers should be at least 21 cm, the working width should be 12 cm, the installation angle relative to the direction of travel should be 37°, the radius of curvature of the working surface should be 32 cm, and the distance between the disks should be 26 cm. The obtained results can be used in the development, design, and manufacture of two-track mounted harrowing units.

Hali tarjima qilinmagan

Identifikatorlar

Iqtiboslar va manbalar